Hi
I am using u-boot-1.1.6 and building u-boot from my new board which includes
nand flash support
If I build using armv5tel-reghat-linux-gnueabi-gcc (4.1.2) toolchain it gives
build failure with below log
--start-group lib_generic/libgeneric.a
board/Marvell/rd6281/librd6281.a cpu/arm926ejs/libarm926ejs.a
cpu/arm926ejs/feroceon/libferoceon.a lib_arm/libarm.a fs/cramfs/libcramfs.a
fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a
fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a
drivers/libdrivers.a drivers/nand/libnand.a
drivers/nand_legacy/libnand_legacy.a drivers/sk98lin/libsk98lin.a
post/libpost.a post/cpu/libcpu.a common/libcommon.a --end-group -L
/usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2 -lgcc \
-Map u-boot.map -o u-boot
/usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_divdi3.o):(.ARM.exidx+0x0):
undefined reference to `__aeabi_unwind_cpp_pr0'
/usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0):
undefined reference to `__aeabi_unwind_cpp_pr0'
make: *** [u-boot] Error 1
Whereas,
If I build the same code using codesoucery toolchain (arm2008q1) release (gcc
ver 4.2.3) the build is sucessfull.
I want to go ahead with armv5tel-reghat-linux-gnueabi-gcc (4.1.2)
Can someone suggest what is problem and how should I proceed?
Regards..
Prafulla . .
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
