Hi Jean, First of all sorry for late feedback Thanks for your help. I tried to apply the above patch but it has lot of diff, On the other thread I have migrated to latest u-boot version and the problem got resolved :-) I think your patch is mainlined.
But I am facing now new problem... The earlier I was using u-boot ver 1.1.6 and my nand driver was working fine. With migration to latest u-boot I am always getting bad block errors (Skipping bad block 0x????) What could be the problem? Regards.. Prafulla. . > -----Original Message----- > From: Jean-Christophe PLAGNIOL-VILLARD [mailto:[EMAIL PROTECTED] > Sent: Sunday, November 23, 2008 5:57 AM > To: Prafulla Wadaskar; [email protected] > Subject: Re: [U-Boot] U-boot build failes > witharmv5tel-reghat-linux-gnueabi-gcc (4.1.2) > > On 13:06 Wed 19 Nov , Jean-Christophe PLAGNIOL-VILLARD wrote: > > On 03:10 Wed 19 Nov , Prafulla Wadaskar wrote: > > > Hi > > > I am using u-boot-1.1.6 and building u-boot from my new > board which > > > includes nand flash support > > > > > > If I build using armv5tel-reghat-linux-gnueabi-gcc > (4.1.2) toolchain > > > it gives build failure with below log > > > > > > --start-group > lib_generic/libgeneric.a board/Marvell/rd6281/librd6281.a > cpu/arm926ejs/libarm926ejs.a > cpu/arm926ejs/feroceon/libferoceon.a lib_arm/libarm.a > fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a > fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a > fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a > dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a > drivers/nand_legacy/libnand_legacy.a > drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a > common/libcommon.a --end-group -L > /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2 -lgcc \ > > > -Map u-boot.map -o u-boot > > > > /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_div di3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' > > > > /usr/lib/gcc/armv5tel-redhat-linux-gnueabi/4.1.2/libgcc.a(_udi vdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' > > > make: *** [u-boot] Error 1 > > > > > > Whereas, > > > If I build the same code using codesoucery toolchain > (arm2008q1) release (gcc ver 4.2.3) the build is sucessfull. > > > > > > I want to go ahead with armv5tel-reghat-linux-gnueabi-gcc (4.1.2) > > > Can someone suggest what is problem and how should I proceed? > > update the divdi3 and _udivdi3 implementation > > > > I'll said > > > > so please try this patch > > > > please note I've just test it on one board > > > > Best Regards, > > J. > > Any news? > > Best Regards, > J. > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
