Diptopal Basu, > I have compiled a Linux kernel ( version 2.6.22.19 ) for > ARM at91rm9200dk board, I used the mkimage utility in U < boot load the kernel at a specific area of memory . > ( Skyeye Simulator ) > > However I get the Uncompressing Linux ... message and it > stays at that line indefinitely ... attaching screenshot > ... this is on the skyeye simulator .
That is a fundamental issue with the build of the kernel itself. IE, something fundamentally wrong with the image. u-boot uncompressed it, then jumped to it, and it crashed hard. > I am just booting the kernel I do not have a device tree > blob or anything else here , that is , I compiled the > kernel with at91rm9200dk defconfig, got the zImage , Woah back up. zImage? I'm not sure what the difference is but I use the uImage to boot the kernel. > used mkimage to add a U boot header and > using bootm <memory location where the file is flashed > command to start it . > What could be the problem ? Probably the setup of mkImage is wrong, kernal being loaded in the wrong place in memory, etc or the machine type being passed to the kernel is wrong? PS: I can send you a known working uImage and zImage for the AT91RM9200EK that you can try. Just maybe not today as it's Christmas. Matt _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
