Hi all, I have a board with at91sam9260 configured as little endian (via strap pin). The u-boot is working quite well. On the board there is a chip whose driver was written for PowerPC that is big endian. Unfortunately the driver was
written in a bad way and it is difficult to fix endiannes dependencies. I thought to change the endianness of the processor to big endian. I recompiled everything with a big endian compiler but the u-boot is crashing. Should I change something on my hardware? _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
