tor 2009-01-15 klockan 19:17 +0100 skrev [email protected]: > Hi all, > > I have a board with at91sam9260 configured as little endian (via strap > pin). The u-boot is working quite well. > On the board there is a chip whose > driver was written for PowerPC that is big endian. Unfortunately the driver > was > > written in a bad way and it is difficult to fix endiannes dependencies. I > thought to change the endianness of the processor > to big endian. I recompiled > everything with a big endian compiler but the u-boot is crashing. Should I > change something > on my hardware?
The AT91 series is strictly small endian. Before there is an argument, I'd like to point out people came to the conclusion that "the only good endian is a dead endian" years ago. > > > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot -- Ulf Samuelsson <[email protected]> Atmel Nordic AB _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
