In reality there are only three usarts on at91 SoC and one serial debug port called DBGU which is a reduced functionality usart.
For reasons of clarity and consistency the prefix USART is maintained independently the fact that normally the debug port is just called DBGU. Signed-off-by: Michael Roth <[email protected]> --- drivers/serial/atmel_usart.c | 23 ++++++++++++++--------- include/asm-arm/arch-at91/clk.h | 5 +++++ include/asm-arm/arch-at91/memory-map.h | 8 ++++---- include/configs/afeb9260.h | 2 +- include/configs/at91cap9adk.h | 2 +- include/configs/at91sam9260ek.h | 2 +- include/configs/at91sam9261ek.h | 2 +- include/configs/at91sam9263ek.h | 2 +- include/configs/at91sam9rlek.h | 2 +- 9 files changed, 29 insertions(+), 19 deletions(-) diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index f3b146c..f310dcd 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -22,17 +22,22 @@ #include <asm/arch/memory-map.h> #if defined(CONFIG_USART0) -# define USART_ID 0 -# define USART_BASE USART0_BASE +# define GET_USART_CLK_RATE() get_usart_clk_rate(0) +# define USART_BASE USART0_BASE #elif defined(CONFIG_USART1) -# define USART_ID 1 -# define USART_BASE USART1_BASE +# define GET_USART_CLK_RATE() get_usart_clk_rate(1) +# define USART_BASE USART1_BASE #elif defined(CONFIG_USART2) -# define USART_ID 2 -# define USART_BASE USART2_BASE +# define GET_USART_CLK_RATE() get_usart_clk_rate(2) +# define USART_BASE USART2_BASE #elif defined(CONFIG_USART3) -# define USART_ID 3 -# define USART_BASE USART3_BASE +# define GET_USART_CLK_RATE() get_usart_clk_rate(3) +# define USART_BASE USART3_BASE +#elif defined(CONFIG_USART_DBGU) +# define GET_USART_CLK_RATE() get_usart_dbgu_clk_rate() +# define USART_BASE USART_DBGU_BASE +#else +# error No CONFIG_USARTx defined! #endif #include "atmel_usart.h" @@ -49,7 +54,7 @@ void serial_setbrg(void) * Baud Rate = -------------- * 16 * CD */ - usart_hz = get_usart_clk_rate(USART_ID); + usart_hz = GET_USART_CLK_RATE(); divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate; usart3_writel(BRGR, USART3_BF(CD, divisor)); } diff --git a/include/asm-arm/arch-at91/clk.h b/include/asm-arm/arch-at91/clk.h index 1b502c8..51a90a9 100644 --- a/include/asm-arm/arch-at91/clk.h +++ b/include/asm-arm/arch-at91/clk.h @@ -36,6 +36,11 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id) return AT91_MASTER_CLOCK; } +static inline unsigned long get_usart_dbgu_clk_rate(void) +{ + return AT91_MASTER_CLOCK; +} + static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id) { return AT91_MASTER_CLOCK; diff --git a/include/asm-arm/arch-at91/memory-map.h b/include/asm-arm/arch-at91/memory-map.h index 8015dad..0013022 100644 --- a/include/asm-arm/arch-at91/memory-map.h +++ b/include/asm-arm/arch-at91/memory-map.h @@ -26,9 +26,9 @@ #include <asm/arch/hardware.h> -#define USART0_BASE AT91_USART0 -#define USART1_BASE AT91_USART1 -#define USART2_BASE AT91_USART2 -#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) +#define USART0_BASE AT91_USART0 +#define USART1_BASE AT91_USART1 +#define USART2_BASE AT91_USART2 +#define USART_DBGU_BASE (AT91_BASE_SYS + AT91_DBGU) #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9eed342..815483a 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -52,7 +52,7 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_DBGU 1 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 01da99b..39d13ee 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -56,7 +56,7 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_DBGU 1 /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 2f1a41f..2b81cb0 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -56,7 +56,7 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_DBGU 1 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index ebecfa4..3db0cca 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -55,7 +55,7 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_DBGU 1 /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 09b871a..ff9ce46 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -56,7 +56,7 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_DBGU 1 /* LCD */ #define CONFIG_LCD 1 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 5bef1fe..b6adcb8 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -55,7 +55,7 @@ #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_DBGU 1 /* LCD */ #define CONFIG_LCD 1 -- 1.6.0.6 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
