On 15:12 Fri 06 Feb , Michael Roth wrote: > Created a new function at91_serial_hw_init() which sets up the > dedicated PIO pins of several at91 SoC according to CONFIG_USARTx. > > Please note that the used pins for serial communication varies on > different at91 SoC independently of the logic functionality equality > of the serial hardware. But for each serial channel there is only > one possibility for IO pin multiplexing so there is no need for board > specific PIO setup. So the usage of SoC specific PIO setup is advisable. > > Signed-off-by: Michael Roth <[email protected]> please do remove my Copyright and orignial sob
I've done this for the serial to add multiple serial support please do not remvoe Best Regards, J. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
