[U-Boot] [PATCH] mx25pdk: Adapt it for the new PMIC framework

[Fabio Estevam]

Make the necessary adaptions for the new PMIC framework, so that mx25pdk can
be built again. 

Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Stefano,

Build tested only, as I did not manage to get access to a mx25pdk.

 board/freescale/mx25pdk/mx25pdk.c |   13 ++++++++++---
 include/configs/mx25pdk.h         |    6 +++---
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/board/freescale/mx25pdk/mx25pdk.c 
b/board/freescale/mx25pdk/mx25pdk.c
index 72fa6bc..d73e27e 100644
--- a/board/freescale/mx25pdk/mx25pdk.c
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -27,7 +27,7 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <i2c.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc34704.h>
 
@@ -110,11 +110,18 @@ int board_init(void)
 int board_late_init(void)
 {
        struct pmic *p;
+       int ret;
 
        mx25pdk_fec_init();
 
-       pmic_init();
-       p = get_pmic();
+       ret = pmic_init(I2C_PMIC);
+       if (ret)
+               return ret;
+
+       p = pmic_get("FSL_PMIC");
+       if (!p)
+               return -ENODEV;
+
        /* Turn on Ethernet PHY supply */
        pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
 
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index b5338a0..bbb3161 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -108,9 +108,9 @@
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
 /* PMIC Configs */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
 #define CONFIG_PMIC_FSL_MC34704
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR   0x54
 
-- 
1.7.9.5


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot