This patch set adds hardware acceleration for SHA 256
with the help of ACE.

Changes since v1:
        - Patch-1: Fixed few nits.
        - Patch-2: Removed not required config.
        - Patch-3: Added sha256 to hash command instead of new sha256 command.

Changes since v2:
        - Patch-1: 
                - Added falling back to software sha256 in case length exceeds 
buffer limit.
                - Reduced one tab at lines 533, 559 and 571 in the patch.
                - Removed space after a cast at line 506 in the patch.
                - Removed blank line at line 561 in the patch.
                - Removed space before semicolon at line 576 in the patch.
        - Patch-2: 
                - Added "SHA1" in the comment for config.
        - Patch-3: 
                - Added new nodes for SHA1 and SHA256 in struct hash_algo for 
the case when ACE is enabled.
                - Added new declaration for function pointer hash_func_ws with 
different return type.
        - Patch-4: 
                - New patch to enable config for hash command.

Changes since v3:
        - Patch-1:
                - Removed buffer limit since there are 2 regs for address 
hash_msg_size_high and low.
                  That means buffer length could go upto 2^64 bits which is 
practically 
                - Removed falling back to software sha256 because there is no 
buffer limit.
                - Removed "/ 4" to sha1 and sha256 lengths and added increment 
to 4 in for loop at line 573.
                - Timed out still kept to be 100 ms since this is enough for 
hardware to switch status to idle from busy.
                  In case it couldn't that means h/w is faulty.
        - Patch-2:
                - Added "Acked-by: Simon Glass <[email protected]>".
        - Patch-3:
                - New patch.
        - Patch-4:
                - Changed command names to lower case in algo struct.
                - Added generic ace_sha config.
        - Patch-5: Added acked-by Simon Glass
                - Added new generic config for ace_sha to enable ace support in 
hash.c.

Akshay Saraswat (5):
  Exynos: Add hardware accelerated SHA 256
  Exynos: config: Enable ACE HW for SHA 256 for Exynos
  gen: Change return type to int for hash_func_ws function pointer
  gen: Add ACE acceleration to hash
  Exynos: config: Enable hash command

 Makefile                               |   1 +
 arch/arm/include/asm/arch-exynos/cpu.h |   4 +
 common/hash.c                          |  14 ++
 drivers/crypto/Makefile                |  47 +++++
 drivers/crypto/ace_sfr.h               | 310 +++++++++++++++++++++++++++++++++
 drivers/crypto/ace_sha.c               | 122 +++++++++++++
 include/ace_sha.h                      |  42 +++++
 include/configs/exynos5250-dt.h        |   5 +
 include/hash.h                         |   2 +-
 include/sha1.h                         |   2 +-
 include/sha256.h                       |   2 +-
 lib/sha1.c                             |   4 +-
 lib/sha256.c                           |   4 +-
 13 files changed, 554 insertions(+), 5 deletions(-)
 create mode 100644 drivers/crypto/Makefile
 create mode 100644 drivers/crypto/ace_sfr.h
 create mode 100644 drivers/crypto/ace_sha.c
 create mode 100644 include/ace_sha.h

-- 
1.8.0

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to