Signed-off-by: Lubomir Popov <lpo...@mm-sol.com>
---
The som5_evb is an evaluation board for the APM-5 - a OMAP5430-based SOM (system
On a Module) designed by MMS and manufactured under license by Jorjin
Technologies.
arch/arm/include/asm/mach-types.h | 13 ++
board/mms/som5_evb/Makefile | 49 +++++
board/mms/som5_evb/s5evb_mux_data.h | 376 +++++++++++++++++++++++++++++++++++
board/mms/som5_evb/som5_evb.c | 200 +++++++++++++++++++
boards.cfg | 1 +
include/configs/omap5_som5_evb.h | 336 +++++++++++++++++++++++++++++++
6 files changed, 975 insertions(+)
create mode 100644 board/mms/som5_evb/Makefile
create mode 100644 board/mms/som5_evb/s5evb_mux_data.h
create mode 100644 board/mms/som5_evb/som5_evb.c
create mode 100644 include/configs/omap5_som5_evb.h
diff --git a/arch/arm/include/asm/mach-types.h
b/arch/arm/include/asm/mach-types.h
index a676b6d..236fa17 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -1107,6 +1107,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_OMAP5_SEVM 3777
#define MACH_TYPE_ARMADILLO_800EVA 3863
#define MACH_TYPE_KZM9G 4140
+#define MACH_TYPE_SOM5_EVB 4545
#ifdef CONFIG_ARCH_EBSA110
# ifdef machine_arch_type
@@ -14248,6 +14249,18 @@ extern unsigned int __machine_arch_type;
# define machine_is_kzm9g() (0)
#endif
+#ifdef CONFIG_MACH_SOM5_EVB
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SOM5_EVB
+# endif
+# define machine_is_som5_evb() (machine_arch_type == MACH_TYPE_SOM5_EVB)
+#else
+# define machine_is_som5_evb() (0)
+#endif
+
/*
* These have not yet been registered
*/
diff --git a/board/mms/som5_evb/Makefile b/board/mms/som5_evb/Makefile
new file mode 100644
index 0000000..248e5cc
--- /dev/null
+++ b/board/mms/som5_evb/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := som5_evb.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mms/som5_evb/s5evb_mux_data.h
b/board/mms/som5_evb/s5evb_mux_data.h
new file mode 100644
index 0000000..791a4ad
--- /dev/null
+++ b/board/mms/som5_evb/s5evb_mux_data.h
@@ -0,0 +1,376 @@
+/*
+ * Copyright (C) 2013 MM Solutions AD, <www.mm-sol.com>
+ *
+ * Lubomir Popov <lpo...@mm-sol.com> <l-po...@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _SOM5_EVB_MUX_DATA_H
+#define _SOM5_EVB_MUX_DATA_H
+
+#include <asm/arch/mux_omap5.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+ {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */
+ {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */
+ {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */
+ {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */
+ {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */
+ {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */
+ {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */
+ {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */
+ {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */
+ {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */
+
+ {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */
+ {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */
+ {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0 */
+ {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1 */
+ {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2 */
+ {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3 */
+
+ {UART3_RX_IRRX, (PTU | IEN | M0)},/* UART3_RX_IRRX */
+ {UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */
+
+ {HSI2_CAREADY, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_CLK */
+ {HSI2_ACREADY, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_NXT */
+ {HSI2_CAWAKE, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DIR */
+ {HSI2_ACWAKE, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_STP */
+ {HSI2_CAFLAG, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA0 */
+ {HSI2_CADATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA1 */
+ {HSI2_ACFLAG, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA2 */
+ {HSI2_ACDATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA3 */
+ {UART2_RTS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA4 */
+ {UART2_CTS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA5 */
+ {UART2_RX, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA6 */
+ {UART2_TX, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /*
USBB1_ULPIPHY_DATA7 */
+
+ {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */
+ {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */
+
+ {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE */
+ {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */
+
+ {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */
+ {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */
+ {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX (LP: WTF is this
for?) */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+ {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
+ {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
+
+ {SYS_32K, (IEN | M0)}, /* SYS_32K */
+
+};
+
+const struct pad_conf_entry core_padconf_array_non_essential[] = {
+#if 0
+/* GPMC is actually not useable directly as we don't have
+ the GPMC_NOE_NRE signal available, and some external logic
+ shall be needed. Anyway, M4 is the reset default.
+*/
+ {C2C_DATAIN0, (IEN | M4)}, /* GPMC_AD0 */
+ {C2C_DATAIN1, (IEN | M4)}, /* GPMC_AD1 */
+ {C2C_DATAIN2, (IEN | M4)}, /* GPMC_AD2 */
+ {C2C_DATAIN3, (IEN | M4)}, /* GPMC_AD3 */
+ {C2C_DATAIN4, (IEN | M4)}, /* GPMC_AD4 */
+ {C2C_DATAIN5, (IEN | M4)}, /* GPMC_AD5 */
+ {C2C_DATAIN6, (IEN | M4)}, /* GPMC_AD6 */
+ {C2C_DATAIN7, (IEN | M4)}, /* GPMC_AD7 */
+ {C2C_CLKIN1, (IEN | M4)}, /* GPMC_CLK */
+ {C2C_CLKIN0, (M5)}, /* GPMC_NBE1 */
+ {C2C_CLKOUT0, (M4)}, /* GPMC_NADV_ALE */
+ {C2C_CLKOUT1, (M4)}, /* GPMC_NBE0_CLE */
+ {C2C_DATAOUT0, (IEN | M4)}, /* GPMC_AD8 */
+ {C2C_DATAOUT1, (IEN | M4)}, /* GPMC_AD9 */
+ {C2C_DATAOUT2, (IEN | M4)}, /* GPMC_AD10 */
+ {C2C_DATAOUT3, (IEN | M4)}, /* GPMC_AD11 */
+ {C2C_DATAOUT4, (IEN | M4)}, /* GPMC_AD12 */
+ {C2C_DATAOUT5, (IEN | M4)}, /* GPMC_AD13 */
+ {C2C_DATAOUT6, (IEN | M4)}, /* GPMC_AD14 */
+ {C2C_DATAOUT7, (IEN | M4)}, /* GPMC_AD15 */
+ {C2C_DATA8, (M4)}, /* GPMC_A16 */
+ {C2C_DATA9, (M4)}, /* GPMC_A17 */
+ {C2C_DATA10, (M4)}, /* GPMC_A18 */
+ {C2C_DATA11, (M4)}, /* GPMC_A19 */
+ {C2C_DATA12, (M4)}, /* GPMC_A20 */
+ {C2C_DATA13, (M4)}, /* GPMC_A21 */
+ {C2C_DATA14, (M4)}, /* GPMC_A22 */
+ {C2C_DATA15, (M4)}, /* GPMC_A23 */
+ {LLIA_WAKEREQOUT, (PTU | IEN | M4)}, /* GPMC_WAIT0 */
+ {UART1_RTS, (M4)}, /* GPMC_NCS7 */
+#else
+/* Test in GPIO mode. Convention: left (odd) pins on connector are
+ outputs (initialized to PD), right (even) pins are inputs with PU.
+*/
+ {C2C_DATAIN0, (IEN | PTU | M6)}, /* GPIO2_37 In J201:06 */
+ {C2C_DATAIN1, (IEN | PTU | M6)}, /* GPIO2_38 In J201:04 */
+ {C2C_DATAIN2, (IEN | PTU | M6)}, /* GPIO2_39 In J201:10 */
+ {C2C_DATAIN3, (IEN | PTU | M6)}, /* GPIO2_40 In J201:08 */
+ {C2C_DATAIN4, (IEN | PTU | M6)}, /* GPIO2_41 In J201:16 */
+ {C2C_DATAIN5, (IEN | PTU | M6)}, /* GPIO2_42 In J201:12 */
+ {C2C_DATAIN6, (IEN | PTU | M6)}, /* GPIO2_43 In J201:20 */
+ {C2C_DATAIN7, (IEN | PTU | M6)}, /* GPIO2_44 In J201:18 */
+ {C2C_CLKIN1, (PTD | M6)}, /* GPIO2_36 Out J201:03 */
+ {C2C_CLKIN0, (PTD | M6)}, /* GPIO2_35 Out J201:11 */
+ {C2C_CLKOUT0, (PTD | M6)}, /* GPIO2_33 Out J201:17 */
+ {C2C_CLKOUT1, (PTD | M6)}, /* GPIO2_34 Out J201:09 */
+ {C2C_DATAOUT0, (PTD | M6)}, /* GPIO2_56 Out J201:31 */
+ {C2C_DATAOUT1, (PTD | M6)}, /* GPIO2_57 Out J201:23 */
+ {C2C_DATAOUT2, (PTD | M6)}, /* GPIO2_58 Out J201:25 */
+ {C2C_DATAOUT3, (PTD | M6)}, /* GPIO2_59 Out J201:15 */
+ {C2C_DATAOUT4, (PTD | M6)}, /* GPIO2_60 Out J201:29 */
+ {C2C_DATAOUT5, (PTD | M6)}, /* GPIO2_61 Out J201:21 */
+ {C2C_DATAOUT6, (IEN | PTU | M6)}, /* GPIO2_62 In J201:22 */
+ {C2C_DATAOUT7, (IEN | PTU | M6)}, /* GPIO2_63 In J201:24 */
+ {C2C_DATA8, (IEN | PTU | M6)}, /* GPIO4_113 In J201:32 */
+ {C2C_DATA9, (IEN | PTU | M6)}, /* GPIO4_114 In J201:30 */
+ {C2C_DATA10, (IEN | PTU | M6)}, /* GPIO4_115 In J201:36 */
+ {C2C_DATA11, (IEN | PTU | M6)}, /* GPIO4_116 In J201:26 */
+ {C2C_DATA12, (PTD | M6)}, /* GPIO4_117 Out J201:35 */
+ {C2C_DATA13, (PTD | M6)}, /* GPIO4_118 Out J201:33 */
+ {C2C_DATA14, (IEN | PTU | M6)}, /* GPIO4_119 In J201:38 */
+ {C2C_DATA15, (IEN | PTU | M6)}, /* GPIO4_120 In J201:34 */
+ {LLIA_WAKEREQOUT, (PTD | M6)}, /* GPIO2_45 Out J201:07 */
+ {UART1_RTS, (PTD | M6)}, /* GPIO3_75 Out J201:37 */
+#endif
+ {LLIB_WAKEREQOUT, (PTU | IEN | M6)}, /* GPIO2_32 In I/O Exp Int */
+
+ {HSI1_ACREADY, (PTD | M6)}, /* GPIO3_64 Out J701:28 */
+ {HSI1_CAREADY, (PTD | M6)}, /* GPIO3_65 Out J701:26 */
+ {HSI1_ACWAKE, (PTD | M6)}, /* GPIO3_66 Out J801:25 */
+ {HSI1_CAWAKE, (PTU | IEN | M6)}, /* GPIO3_67 In SDcard:CD */
+ {HSI1_ACFLAG, (PTU | IEN | M6)}, /* GPIO3_68 In J801:22 */
+ {HSI1_ACDATA, (PTD | M6)}, /* GPIO3_69 Out J801:21 */
+ {HSI1_CAFLAG, (PTU | IEN | M6)}, /* GPIO3_70 In J801:32 */
+ {HSI1_CADATA, (PTD | M6)}, /* GPIO3_71 Out J801:29 */
+ {UART1_TX, (PTU | IEN | M6)}, /* GPIO3_72 In J801:26 */
+ {UART1_CTS, (PTD | M6)}, /* GPIO3_73 Out J801:31 */
+ {UART1_RX, (PTU | IEN | M6)}, /* GPIO3_74 In J801:30 */
+
+ {USBB1_HSIC_STROBE, (PTU | IEN | M6)}, /* GPIO3_92 In NU */
+ {USBB1_HSIC_DATA, (PTU | IEN | M6)}, /* GPIO3_93 In NU */
+
+ {TIMER10_PWM_EVT, (PTD | M6)}, /* GPIO6_188 Out J802:11 */
+ {DSIPORTA_TE0, (PTU | IEN | M6)}, /* GPIO6_189 In J802:26 */
+ {DSIPORTA_LANE0X, (IEN | M0)}, /* DSIPORTA_LANE0X J704 */
+ {DSIPORTA_LANE0Y, (IEN | M0)}, /* DSIPORTA_LANE0Y J704 */
+ {DSIPORTA_LANE1X, (IEN | M0)}, /* DSIPORTA_LANE1X J704 */
+ {DSIPORTA_LANE1Y, (IEN | M0)}, /* DSIPORTA_LANE1Y J704 */
+ {DSIPORTA_LANE2X, (IEN | M0)}, /* DSIPORTA_LANE2X J704 */
+ {DSIPORTA_LANE2Y, (IEN | M0)}, /* DSIPORTA_LANE2Y J704 */
+ {DSIPORTA_LANE3X, (IEN | M0)}, /* DSIPORTA_LANE3X J704 */
+ {DSIPORTA_LANE3Y, (IEN | M0)}, /* DSIPORTA_LANE3Y J704 */
+ {DSIPORTA_LANE4X, (IEN | M0)}, /* DSIPORTA_LANE4X J704 */
+ {DSIPORTA_LANE4Y, (IEN | M0)}, /* DSIPORTA_LANE4Y J704 */
+
+ {TIMER9_PWM_EVT, (PTU | IEN | M6)}, /* GPIO6_190 In J802:12 */
+ {DSIPORTC_TE0, (PTD | M6)}, /* GPIO6_191 Out J802:15 */
+ {DSIPORTC_LANE0X, (IEN | M0)}, /* DSIPORTC_LANE0X J702 */
+ {DSIPORTC_LANE0Y, (IEN | M0)}, /* DSIPORTC_LANE0Y J702 */
+ {DSIPORTC_LANE1X, (IEN | M0)}, /* DSIPORTC_LANE1X J702 */
+ {DSIPORTC_LANE1Y, (IEN | M0)}, /* DSIPORTC_LANE1Y J702 */
+ {DSIPORTC_LANE2X, (IEN | M0)}, /* DSIPORTC_LANE2X J702 */
+ {DSIPORTC_LANE2Y, (IEN | M0)}, /* DSIPORTC_LANE2Y J702 */
+ {DSIPORTC_LANE3X, (IEN | M0)}, /* DSIPORTC_LANE3X J702 */
+ {DSIPORTC_LANE3Y, (IEN | M0)}, /* DSIPORTC_LANE3Y J702 */
+ {DSIPORTC_LANE4X, (IEN | M0)}, /* DSIPORTC_LANE4X J702 */
+ {DSIPORTC_LANE4Y, (IEN | M0)}, /* DSIPORTC_LANE4Y J702 */
+
+ {RFBI_HSYNC0, (M4)}, /* KBD_COL5 (Out) HOME */
+ {RFBI_TE_VSYNC0, (PTD | M6)}, /* GPIO6_161 Out J704:24
3D_MODE_EN */
+ {RFBI_WE, (PTD | M5)}, /* DRM_EMU2 (Out) */
+ {RFBI_CS0, (PTD | M5)}, /* DRM_EMU3 (Out) */
+ {RFBI_RE, (M4)}, /* KBD_COL4 (Out) SEND */
+ {RFBI_A0, (PTU | IEN | M6)}, /* GPIO6_165 In SH2_SENS_INT */
+ {RFBI_DATA0, (PTD | M5)}, /* DRM_EMU4 (Out) */
+ {RFBI_DATA1, (PTD | M5)}, /* DRM_EMU5 (Out) */
+ {RFBI_DATA2, (PTD | M5)}, /* DRM_EMU6 (Out) */
+ {RFBI_DATA3, (PTD | M6)}, /* GPIO6_169 Out J704:22
3D_LCD_BANK_SEL */
+ {RFBI_DATA4, (PTU | IEN | M6)}, /* GPIO6_170 In TEMP_ALERT on
SOM (OD) */
+ {RFBI_DATA5, (PTU | IEN | M6)}, /* GPIO6_171 In J802:30 */
+ {RFBI_DATA6, (PTD | M6)}, /* GPIO6_172 Out LAN9730 nRESET
*/
+ {RFBI_DATA7, (PTD | M6)}, /* GPIO6_173 Out USB4640 nRESET
*/
+ {RFBI_DATA8, (M4)}, /* KBD_COL3 (Out) VOL- */
+ {RFBI_DATA9, (PTD | M6)}, /* GPIO6_175 Out MCLK_1E */
+ {RFBI_DATA10, (PTD | M6)}, /* GPIO6_176 Out MCLK_2E */
+ {RFBI_DATA11, (PTD | M6)}, /* GPIO6_177 Out MCLK_3E */
+ {RFBI_DATA12, (PTD | M6)}, /* GPIO6_178 Out J703:25
CAM_SUBPM_EN */
+ {RFBI_DATA13, (PTU | IEN | M6)}, /* GPIO6_179 In J704:27
TSCR_INT (OD) */
+ {RFBI_DATA14, (M4)}, /* KBD_COL7 (Out) SEARCH */
+ {RFBI_DATA15, (M4)}, /* KBD_COL6 (Out) END */
+
+ {GPIO6_182, (PTU | IEN | M6)}, /* GPIO6_182 In J802:28 */
+ {GPIO6_183, (PTD | M6)}, /* GPIO6_183 Out J704:25
nLCD_RESET */
+ {GPIO6_184, (M4)}, /* KBD_COL2 (Out) VOL+ */
+ {GPIO6_185, (PTU | IEN | M6)}, /* GPIO6_185 In J802:32 */
+ {GPIO6_186, (PTD | M6)}, /* GPIO6_186 Out J802:25 */
+ {GPIO6_187, (PTU | IEN | M4)}, /* KBD_ROW2 (In) All btns*/
+#if 0
+ {MCSPI2_CS0, (M0)}, /* MCSPI2_CS0 J802:31 */
+ {MCSPI2_CLK, (IEN | M0)}, /* MCSPI2_CLK J802:23 */
+ {MCSPI2_SIMO, (IEN | M0)}, /* MCSPI2_SIMO J802:29 */
+ {MCSPI2_SOMI, (PTU | IEN | M0)}, /* MCSPI2_SOMI J802:18 */
+#else
+ {MCSPI2_CS0, (PTD | M6)}, /* GPIO7_196 Out J802:31 */
+ {MCSPI2_CLK, (PTD | M6)}, /* GPIO7_197 Out J802:23 */
+ {MCSPI2_SIMO, (PTD | M6)}, /* GPIO7_198 Out J802:29 */
+ {MCSPI2_SOMI, (PTU | IEN | M6)}, /* GPIO7_199 In J802:18 */
+#endif
+ {I2C4_SCL, (IEN | PTU | M0)}, /* I2C4_SCL */
+ {I2C4_SDA, (IEN | PTU | M0)}, /* I2C4_SDA */
+
+ {HDMI_CEC, (IEN | M0)}, /* HDMI_CEC */
+ {HDMI_HPD, (PTD | IEN | M0)}, /* HDMI_HPD */
+ {HDMI_DDC_SCL, (IEN | M0)}, /* HDMI_DDC_SCL */
+ {HDMI_DDC_SDA, (IEN | M0)}, /* HDMI_DDC_SDA */
+
+ {CSIPORTA_LANE0X, (IEN | M0)}, /* CSIPORTA_LANE0X */
+ {CSIPORTA_LANE0Y, (IEN | M0)}, /* CSIPORTA_LANE0Y */
+ {CSIPORTA_LANE1Y, (IEN | M0)}, /* CSIPORTA_LANE1Y */
+ {CSIPORTA_LANE1X, (IEN | M0)}, /* CSIPORTA_LANE1X */
+ {CSIPORTA_LANE2Y, (IEN | M0)}, /* CSIPORTA_LANE2Y */
+ {CSIPORTA_LANE2X, (IEN | M0)}, /* CSIPORTA_LANE2X */
+ {CSIPORTA_LANE3X, (IEN | M0)}, /* CSIPORTA_LANE3X */
+ {CSIPORTA_LANE3Y, (IEN | M0)}, /* CSIPORTA_LANE3Y */
+ {CSIPORTA_LANE4X, (IEN | M0)}, /* CSIPORTA_LANE4X */
+ {CSIPORTA_LANE4Y, (IEN | M0)}, /* CSIPORTA_LANE4Y */
+
+ {CSIPORTB_LANE0X, (IEN | M0)}, /* CSIPORTB_LANE0X */
+ {CSIPORTB_LANE0Y, (IEN | M0)}, /* CSIPORTB_LANE0Y */
+ {CSIPORTB_LANE1Y, (IEN | M0)}, /* CSIPORTB_LANE1Y */
+ {CSIPORTB_LANE1X, (IEN | M0)}, /* CSIPORTB_LANE1X */
+ {CSIPORTB_LANE2Y, (IEN | M0)}, /* CSIPORTB_LANE2Y */
+ {CSIPORTB_LANE2X, (IEN | M0)}, /* CSIPORTB_LANE2X */
+
+ {CSIPORTC_LANE0Y, (IEN | M0)}, /* CSIPORTC_LANE0Y */
+ {CSIPORTC_LANE0X, (IEN | M0)}, /* CSIPORTC_LANE0X */
+ {CSIPORTC_LANE1Y, (IEN | M0)}, /* CSIPORTC_LANE1Y */
+ {CSIPORTC_LANE1X, (IEN | M0)}, /* CSIPORTC_LANE1X */
+
+ {CAM_SHUTTER, (M0)}, /* CAM_SHUTTER/224 J701:22
*/
+ {CAM_STROBE, (M0)}, /* CAM_STROBE/225 J701:24
*/
+ {CAM_GLOBALRESET, (IEN | M0)}, /* CAM_GLOBALRESET/226 J701:20
*/
+ {TIMER11_PWM_EVT, (PTD | M6)}, /* GPIO8_227 Out J703:26
PRIMARY_5M_RESET_N */
+ {TIMER5_PWM_EVT, (PTD | M6)}, /* GPIO8_228 Out J703:28
SECONDARY_5M_RESET_N */
+ {TIMER6_PWM_EVT, (PTD | M6)}, /* GPIO8_229 Out J701:18 */
+ {TIMER8_PWM_EVT, (PTD | M6)}, /* GPIO8_230 Out J701:16 */
+
+ {I2C3_SCL, (IEN | PTU | M0)}, /* I2C3_SCL */
+ {I2C3_SDA, (IEN | PTU | M0)}, /* I2C3_SDA */
+
+ {GPIO8_233, (PTD | M6)}, /* GPIO8_233 Out J701:25 */
+
+ {ABE_CLKS, (IEN | M0)}, /* ABE_CLKS */
+ {ABEDMIC_DIN1, (PTD | M6)}, /* GPIO4_97 Out J801:13 */
+ {ABEDMIC_DIN2, (PTU | IEN | M6)}, /* GPIO4_98 In J801:12 */
+ {ABEDMIC_DIN3, (PTD | M6)}, /* GPIO4_99 Out J801:11 */
+ {ABEDMIC_CLK1, (PTU | IEN | M6)}, /* GPIO4_100 In J801:14 */
+
+ {ABEDMIC_CLK2, (IEN | M1)}, /* ABEMCBSP1_FSX BT Aud */
+ {ABEDMIC_CLK3, (M1)}, /* ABEMCBSP1_DX BT Aud */
+ {ABESLIMBUS1_CLOCK, (IEN | M1)}, /* ABEMCBSP1_CLKX BT Aud */
+ {ABESLIMBUS1_DATA, (IEN | M1)}, /* ABEMCBSP1_DR BT Aud */
+
+ {ABEMCBSP2_DR, (IEN | M0)}, /* ABEMCBSP2_DR FM Aud */
+ {ABEMCBSP2_DX, (M0)}, /* ABEMCBSP2_DX FM Aud */
+ {ABEMCBSP2_FSX, (IEN | M0)}, /* ABEMCBSP2_FSX FM Aud */
+ {ABEMCBSP2_CLKX, (IEN | M0)}, /* ABEMCBSP2_CLKX FM Aud */
+
+ {ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
ABEMCPDM_UL_DATA */
+ {ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
ABEMCPDM_DL_DATA */
+ {ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
ABEMCPDM_FRAME */
+ {ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /*
ABEMCPDM_LB_CLK */
+
+ {WLSDIO_CLK, (PTU | IEN | M0)}, /* WLSDIO_CLK */
+ {WLSDIO_CMD, (PTU | IEN | M0)}, /* WLSDIO_CMD */
+ {WLSDIO_DATA0, (PTU | IEN | M0)}, /* WLSDIO_DATA0 */
+ {WLSDIO_DATA1, (PTU | IEN | M0)}, /* WLSDIO_DATA1 */
+ {WLSDIO_DATA2, (PTU | IEN | M0)}, /* WLSDIO_DATA2 */
+ {WLSDIO_DATA3, (PTU | IEN | M0)}, /* WLSDIO_DATA3 */
+
+ {UART5_RX, (PTU | IEN | M0)}, /* UART5_RX BT HCI */
+ {UART5_TX, (M0)}, /* UART5_TX BT HCI */
+ {UART5_CTS, (PTU | IEN | M0)}, /* UART5_CTS BT HCI */
+ {UART5_RTS, (M0)}, /* UART5_RTS BT HCI */
+
+ {I2C2_SCL, (IEN | M0)}, /* I2C2_SCL */
+ {I2C2_SDA, (IEN | M0)}, /* I2C2_SDA */
+
+ {MCSPI1_CLK, (PTD | M6)}, /* GPIO5_140 Out WLAN EN */
+ {MCSPI1_SOMI, (PTD | M6)}, /* GPIO5_141 Out J802:17 */
+ {MCSPI1_SIMO, (PTD | M6)}, /* GPIO5_142 Out BT EN */
+ {MCSPI1_CS0, (PTD | M6)}, /* GPIO5_143 Out BT Wkup */
+ {MCSPI1_CS1, (PTD | IEN | M6)}, /* GPIO5_144 In Host WU */
+
+ {I2C5_SCL, (IEN | PTU | M0)}, /* I2C5_SCL */
+ {I2C5_SDA, (IEN | PTU | M0)}, /* I2C5_SDA */
+
+ {PERSLIMBUS2_CLOCK, (PTD | M6)}, /* GPIO5_145 Out AUDPWRON*/
+ {PERSLIMBUS2_DATA, (PTD | M6)}, /* GPIO5_146 Out J802:27 */
+ {UART6_TX, (PTD | M6)}, /* GPIO5_149 Out J802:13 */
+ {UART6_RX, (PTU | IEN | M6)}, /* GPIO5_150 In J802:20 */
+ {UART6_CTS, (PTU | IEN | M6)}, /* GPIO5_151 In J802:21
EXCEPTION TO RULE, SHORT WITH PIN 23 */
+ {UART6_RTS, (PTD | M6)}, /* GPIO5_152 Out J802:19 */
+ {UART3_CTS_RCTX, (PTD | IEN | M6)}, /* GPIO5_153 In J802:14 or
SATA_ACTLED Out (M1). PTD! */
+ {UART3_RTS_IRSD, (PTU | IEN | M6)}, /* GPIO5_154 In J802:16 */
+
+ {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */
+ {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
+
+ {LLIA_WAKEREQIN, (PTU | IEN | M6)}, /* GPIO1_WK14 In J201:19 */
+ {LLIB_WAKEREQIN, (PTU | IEN | M6)}, /* GPIO1_WK15 In J801:18 */
+ {DRM_EMU0, (PTU | IEN | M0)}, /* DRM_EMU0 */
+ {DRM_EMU1, (PTU | IEN | M0)}, /* DRM_EMU1 */
+ {JTAG_NTRST, (IEN | M0)}, /* JTAG_NTRST */
+ {JTAG_TCK, (IEN | M0)}, /* JTAG_TCK */
+ {JTAG_RTCK, (M0)}, /* JTAG_RTCK */
+ {JTAG_TMSC, (IEN | M0)}, /* JTAG_TMSC */
+ {JTAG_TDI, (IEN | M0)}, /* JTAG_TDI */
+ {JTAG_TDO, (M0)}, /* JTAG_TDO */
+ {FREF_CLK_IOREQ, (PTU | IEN | M6)}, /* GPIO1_WK13 In ETH_WAKE */
+ {FREF_CLK0_OUT, (M0)}, /* FREF_CLK0_OUT */
+ {FREF_CLK1_OUT, (M0)}, /* FREF_CLK1_OUT */
+ {FREF_CLK2_OUT, (M0)}, /* FREF_CLK2_OUT */
+ {FREF_CLK2_REQ, (PTU | IEN | M6)}, /* GPIO1_WK9 In WiLink Int */
+ {FREF_CLK1_REQ, (PTU | IEN | M6)}, /* GPIO1_WK8 In SH2_MSP_INT */
+ {SYS_NRESPWRON, (IEN | M0)}, /* SYS_NRESPWRON */
+ {SYS_NRESWARM, (PTU | IEN | M0)}, /* SYS_NRESWARM */
+ {SYS_PWR_REQ, (M0)}, /* SYS_PWR_REQ */
+ {SYS_NIRQ1, (PTU | IEN | M0)}, /* SYS_NIRQ1 */
+ {SYS_NIRQ2, (PTU | IEN | M0)}, /* SYS_NIRQ2 */
+ {SYS_BOOT0, (IEN | M0)}, /* SYS_BOOT0 */
+ {SYS_BOOT1, (IEN | M0)}, /* SYS_BOOT1 */
+ {SYS_BOOT2, (IEN | M0)}, /* SYS_BOOT2 */
+ {SYS_BOOT3, (IEN | M0)}, /* SYS_BOOT3 */
+ {SYS_BOOT4, (IEN | M0)}, /* SYS_BOOT4 */
+ {SYS_BOOT5, (IEN | M0)}, /* SYS_BOOT5 */
+
+};
+
+#endif /* _SOM5_EVB_MUX_DATA_H */
+
diff --git a/board/mms/som5_evb/som5_evb.c b/board/mms/som5_evb/som5_evb.c
new file mode 100644
index 0000000..a84672e
--- /dev/null
+++ b/board/mms/som5_evb/som5_evb.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2013 MM Solutions AD, <www.mm-sol.com>
+ *
+ * 02/2013 Derived from OMAP5 EVM and modified for the SOM5 EVB
+ * by Lubomir Popov <lpo...@mm-sol.com> <l-po...@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl6035.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/gpio.h>
+#include <asm/omap_common.h>
+
+#include "s5evb_mux_data.h"
+
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+ "Board: MM Solutions SOM5 EVB\n"
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+ gpmc_init();
+ gd->bd->bi_arch_number = MACH_TYPE_SOM5_EVB;
+ gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return 0;
+}
+
+/**
+ * @brief misc_init_r - Configure SOM5 EVB board specific features
+ * such as power configurations, ethernet initialization as phase2
+ * of boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+#ifdef CONFIG_TWL6035_POWER
+ twl6035_init_settings();
+#ifdef CONFIG_TWL6035_AUDPWR
+ /* Useful for measuring voltages around the codec.
+ * Works with a TWL604x only.
+ */
+ twl6035_audio_power(1); /* Power on 2.1 V SMPS, enable 32 kHz */
+ udelay(1000); /* Allow ramp-up */
+ /* Start TWL6040 internal power on sequence: */
+ gpio_request(CONFIG_OMAP_AUDPWRON_GPIO, "AUDPWRON");
+ gpio_direction_output(CONFIG_OMAP_AUDPWRON_GPIO, 1);
+#endif
+#ifdef CONFIG_BB_CHRG
+ /* Board has a 3 V super-cap for BB */
+ twl6035_enable_bb_charge(BB_HIGH_ICHRG | BB_VSEL_3V0 | BB_CHRG_EN);
+#endif
+#endif /* CONFIG_TWL6035_POWER */
+#ifdef CONFIG_SYSCLK_OUT_EN
+ /* Enable FREF_XTAL_CLK output (19.2 MHz).
+ * Used as Audio MCLK; for measurement only.
+ * TODO: Use proper defines
+ * control_ckobuffer
+ */
+ writel(0x10000000, 0x4ae0cdb4);
+#endif
+ return 0;
+}
+
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ /* Set the MSECURE Mode for GPIO234 pin */
+ if (get_device_type() == DEVICE_GP) {
+ u32 msecure_pad = CONTROL_PADCONF_CORE + GPIO8_234;
+ writew((readw(msecure_pad) & ~M7) | M1, msecure_pad);
+ }
+#ifdef CONFIG_I2C_INTERNAL_PULLUPS
+ /* Enable internal I2C-compatible pullups on all buses
+ * TODO: Replace this ugly hardcoding with proper defines (omap.h)
+ * control_smart3io_padconf_0, control_i2c_0
+ */
+ writel(0x00554000, 0x4a002dc0); /* First set drive strength */
+ writel(0, 0x4a002e04); /* Now enable pull-ups */
+#endif
+}
+
+void set_muxconf_regs_non_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
+ sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI
+
+#define USB_HOST_HS_CLKCTRL_MASK 0x0100D7C0 /*
CM_L3INIT_USB_HOST_HS_CLKCTRL */
+#define USB_TLL_HS_CLKCTRL_MASK 0x00000700 /*
CM_L3INIT_USB_TLL_HS_CLKCTRL */
+
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, /* USBB1: ULPI PHY
TUSB1210 */
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC, /* USBB2: HSIC USB4640
hub */
+ .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, /* USBB3: HSIC LAN9730
Ethernet ctrl */
+};
+
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ int ret;
+
+ /* Enbale all 3 USB ports UHH, UTMI and HSIC clocks */
+ setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl,
+ USB_HOST_HS_CLKCTRL_MASK);
+
+ /* Enbale all 3 USB host ports TLL clocks */
+ setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
+ USB_TLL_HS_CLKCTRL_MASK);
+
+ /* USBB1 ULPI PHY uses OMAP FREF_CLK0_OUT. Must turn it on.
+ * TODO: Replace this ugly hardcoding with proper defines
+ */
+ writel(0x0100, 0x4ae0a310);
+ udelay(1000); /* Let PHY PLL lock */
+
+ ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+ int ret;
+
+ ret = omap_ehci_hcd_stop();
+
+ clrbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl,
+ USB_HOST_HS_CLKCTRL_MASK);
+ clrbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
+ USB_TLL_HS_CLKCTRL_MASK);
+
+ /* TODO: Replace this ugly hardcoding with proper defines
+ */
+ writel(0, 0x4ae0a310); /* Stop FREF_CLK0_OUT */
+ return ret;
+}
+#endif /* CONFIG_USB_EHCI */
+
diff --git a/boards.cfg b/boards.cfg
index 5fc70be..337dc42 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -292,6 +292,7 @@ twister arm armv7
twister technex
nokia_rx51 arm armv7 rx51 nokia
omap3
omap4_panda arm armv7 panda ti
omap4
omap4_sdp4430 arm armv7 sdp4430 ti
omap4
+omap5_som5_evb arm armv7 som5_evb mms
omap5
omap5_evm arm armv7 omap5_evm ti
omap5
dra7xx_evm arm armv7 dra7xx ti
omap5
s5p_goni arm armv7 goni
samsung s5pc1xx
diff --git a/include/configs/omap5_som5_evb.h b/include/configs/omap5_som5_evb.h
new file mode 100644
index 0000000..46a9c0c
--- /dev/null
+++ b/include/configs/omap5_som5_evb.h
@@ -0,0 +1,336 @@
+/*
+ * Copyright (C) 2013 MM Solutions AD, <www.mm-sol.com>
+ *
+ * 02/2013 Derived from OMAP5 EVM and modified for the SOM5 EVB
+ * by Lubomir Popov <lpo...@mm-sol.com> <l-po...@ti.com>
+ *
+ * Configuration settings for the MMS SOM5 (APM-5) Evaluation Board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_OMAP54XX /* which is a 54XX */
+#define CONFIG_OMAP5430 /* which is in a 5430 */
+#define CONFIG_SOM5EVB /* working with the SOM5 EVB */
+/* Machine type for Linux */
+#define CONFIG_MACH_TYPE MACH_TYPE_SOM5_EVB
+
+#define CONFIG_OMAP_GPIO
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+/* Display CPU and Board Info */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 19200000 /* Clock output from T2
*/
+#define V_SCLK V_OSCK
+/* Enable all clocks: */
+/*#define CONFIG_SYS_CLOCKS_ENABLE_ALL*/
+
+#define CONFIG_SYS_ENABLE_PADS_ALL /* Enable all PADS for now */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 128k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
+/* Vector Base */
+#define CONFIG_SYS_CA15_VECTOR_BASE SRAM_ROM_VECT_BASE
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK 48000000
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, \
+ 57600, 115200}
+
+/* I2C */
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0x00 /* Own slave addr */
+#define CONFIG_DRIVER_OMAP54XX_I2C
+#define CONFIG_I2C_MULTI_BUS
+/* MUST be defined if external pullups are not populated: */
+#define CONFIG_I2C_INTERNAL_PULLUPS
+/* Define to use Repeated Start by i2c_read (otherwise Stop-Start
+ * shall be used between the address and data phases):
+ */
+#undef CONFIG_I2C_REPEATED_START
+/* Used by i2c mm/mw; needed for correct write to EEPROM: */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* TWL6035 */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_TWL6035_POWER
+/* Undef to disable forced PWM mode for the 1.8 V SMPS: */
+#define CONFIG_TWL6035_SMPS7_FPWM
+/* Following define enables testing of the TWL6040 audio codec power
+ * supply environment: the PMIC 2.1 V SMPS, and the codec's internal
+ * REF, NCP and HS/LS LDOs. Undef to disable powering up codec. */
+#define CONFIG_TWL6035_AUDPWR
+
+#ifdef CONFIG_TWL6035_AUDPWR
+#define CONFIG_OMAP_AUDPWRON_GPIO 145
+#endif
+/* Undef to disable BB (super-cap) charging: */
+#define CONFIG_BB_CHRG
+#endif /* CONFIG_SPL_BUILD */
+
+/* For Audio MCLK test/measurement only; enables the
+ * OMAP5 FREF_XTAL_CLK output: */
+#define CONFIG_SYSCLK_OUT_EN
+
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_NOWHERE
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET 0xE0000
+#define CONFIG_CMD_SAVEENV
+#endif
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Cache */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_CACHELINE_SHIFT 6
+
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
+/* No signals to reset external PHYs on this board: */
+/*#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO xxx */
+
+/* Due to HSIC connect ussues, device reset is required upon
+ * applying port power. A GPIO is needed per HSIC device:
+ */
+#define CONFIG_OMAP_HSIC_PORT2_RESET_GPIO 173 /* Combo hub */
+#define CONFIG_OMAP_HSIC_PORT3_RESET_GPIO 172 /* Ethernet Ctrlr */
+
+/* USB Networking options */
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* Commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_DHCP /* DHCP support */
+#define CONFIG_CMD_PING /* PING support */
+#define CONFIG_NET_MULTI
+
+#define CONFIG_CMD_EXT2 /* EXT2 support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_GPIO /* GPIO support */
+
+/* Disabled commands */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+/*
+ * Environment setup
+ */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "usbethaddr=9e:77:39:1b:c4:2d\0" \
+ "loadaddr=0x82000000\0" \
+ "console=ttyO2,115200n8\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc${mmcdev} ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; " \
+ "if mmc rescan ; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi "
+
+#define CONFIG_AUTO_COMPLETE 1
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_PROMPT "SOM5_EVB # "
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+/*
+ * memtest setup
+ */
+#define CONFIG_SYS_MEMTEST_START 0xb8000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (256 << 20))
+/* Undef following two for simple mtest */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x81000000
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x80000000
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * SDRAM Memory Map
+ * Even though we use two CS all the memory
+ * is mapped to one contiguous block
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+
+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x40300350
+#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_DISPLAY_PRINT
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address
0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/*
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x80E7FFC0--0x80E80000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80E80000
+
+/*
+ * BSS and malloc area 64MB into memory to allow enough
+ * space for the kernel at the beginning of memory
+ */
+#define CONFIG_SPL_BSS_START_ADDR 0x84000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SPL_GPIO_SUPPORT
+
+#endif /* __CONFIG_H */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
