On Thursday 04 April 2013 23:05:18 York Sun wrote: > On 04/04/2013 01:33 PM, Wolfgang Denk wrote: > > Dear Pali Rohár, > > > > In message <201304041946.55455@pali> you wrote: > >> u-boot "true" and "false" hush commands are copiled > >> incorrectly in uboot v2013.04-rc2 > >> (c8142633e169665b246352918df5b76fd243bb71) > >> > >> when I run help in u-boot it show: > >> > >> # help > >> 0 - do nothing, unsuccessfully > >> 1 - do nothing, successfully > >> ? - alias for 'help' > >> base - print or set address offset > >> ... > >> > >> Instead "0" and "1" there should be "false" and "true" > >> command. > > > > I confirm the problem. > > > > York, your commit 472d546 "Consolidate bool type" is causing > > this issue, so I suggest you send a fix, please. > > > > Please check for other, similar use cases. > > I found the cause but I don't know the best fix. Please help. > > This is cause by common/cmd_test.c. It has command "true" and > "false". Shall I undef true and false before the U_BOOT_CMD > in this file, or use True and False as the names? If there is > a better way to do that, please enlighten me. > > York
If you rename commands "true" and "false" to "True" and "False" you will break all code which using it. Now RX-51 board do not booting due to missing "true" and "false" commands... -- Pali Rohár pali.ro...@gmail.com
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
