Some SPI flash drivers like to have extended id information available (like the spansion flash), so rather than making it re-issue the ID cmd to get at the last 2 bytes, have the common code read 5 bytes rather than just 3. This also matches the Linux behavior where it always reads 5 id bytes from all flashes.
Signed-off-by: Mike Frysinger <[email protected]> CC: Mingkai Hu <[email protected]> CC: Haavard Skinnemoen <[email protected]> --- drivers/mtd/spi/spansion.c | 10 ++-------- drivers/mtd/spi/spi_flash.c | 2 +- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index 9de4b7b..b9746fd 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -310,15 +310,9 @@ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) struct spansion_spi_flash *spsn; unsigned int i; unsigned short jedec, ext_jedec; - int ret; - u8 id[5] = {0}; - - ret = spi_flash_cmd(spi, CMD_READ_ID, id, sizeof(id)); - if (ret) - return NULL; - jedec = id[1] << 8 | id[2]; - ext_jedec = id[3] << 8 | id[4]; + jedec = idcode[1] << 8 | idcode[2]; + ext_jedec = idcode[3] << 8 | idcode[4]; for (i = 0; i < ARRAY_SIZE(spansion_spi_flash_table); i++) { params = &spansion_spi_flash_table[i]; diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 57ef002..9c09d44 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -101,7 +101,7 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, struct spi_slave *spi; struct spi_flash *flash; int ret; - u8 idcode[3]; + u8 idcode[5]; spi = spi_setup_slave(bus, cs, max_hz, spi_mode); if (!spi) { -- 1.6.2 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
