Add all fixed addresses to hardware.h and change petalinux configuration to support this.
Signed-off-by: Michal Simek <[email protected]> --- Changes in v2: - Remove CONFIG_ prefix from non configurable macro (gem) arch/arm/include/asm/arch-zynq/hardware.h | 2 ++ board/xilinx/zynq/board.c | 12 +++++++++--- include/configs/zynq.h | 2 +- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index d8e378f..5820f3b 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -27,6 +27,8 @@ #define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000 #define ZYNQ_SCU_BASEADDR 0xF8F00000 #define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 +#define ZYNQ_GEM_BASEADDR0 0xE000B000 +#define ZYNQ_GEM_BASEADDR1 0xE000C000 /* Reflect slcr offsets */ struct slcr_regs { diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 8ed75c3..3af18f0 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -22,6 +22,8 @@ #include <common.h> #include <netdev.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; @@ -38,10 +40,14 @@ int board_eth_init(bd_t *bis) { u32 ret = 0; -#if defined(CONFIG_ZYNQ_GEM) && defined(CONFIG_ZYNQ_GEM_BASEADDR0) - ret = zynq_gem_initialize(bis, CONFIG_ZYNQ_GEM_BASEADDR0); +#if defined(CONFIG_ZYNQ_GEM) +# if defined(CONFIG_ZYNQ_GEM0) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0); +# endif +# if defined(CONFIG_ZYNQ_GEM1) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1); +# endif #endif - return ret; } #endif diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 1147689..ebe1b1b 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -53,7 +53,7 @@ /* Ethernet driver */ #define CONFIG_NET_MULTI #define CONFIG_ZYNQ_GEM -#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 +#define CONFIG_ZYNQ_GEM0 #if defined(CONFIG_ZYNQ_DCC) # define CONFIG_ARM_DCC -- 1.8.2.1
pgpd_q6idPyxP.pgp
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
