On Thu, May 23, 2013 at 3:24 PM, Kuo-Jung Su <[email protected]> wrote: > 2013/5/23 Jagan Teki <[email protected]>: >> Hi, >> >> On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <[email protected]> wrote: >>> 2013/5/22 Jagan Teki <[email protected]>: >>>> Hi, >>>> >>>> I have a simple question like these parts are legacy flashes i guess. >>>> Could you please tell me on which boards these were used? >>>> >>> >>> It's used on Faraday A369 evaluation board. >>> However the u-boot source codes for A369 is still waiting for approval. >>> Here is the link to u-boot patchwork: >> >> Ok, Thanks for your information. >> >>> >>> http://patchwork.ozlabs.org/patch/242006/ >>> >>>> Thanks, >>>> Jagan. >>>> >>>> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <[email protected]> wrote: >>>>> From: Kuo-Jung Su <[email protected]> >>>>> >>>>> Signed-off-by: Kuo-Jung Su <[email protected]> >>>>> --- >>>>> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >>>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >>>>> index 2716209..2a27837 100644 >>>>> --- a/drivers/mtd/spi/winbond.c >>>>> +++ b/drivers/mtd/spi/winbond.c >>>>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >>>>> >>>>> static const struct winbond_spi_flash_params winbond_spi_flash_table[] = >>>>> { >>>>> { >>>>> + .id = 0x2014, >>>>> + .nr_blocks = 16, >>>>> + .name = "W25P80", >> >> W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08? >> ofcourse, I have seen the same on datasheet as well. >> > > It's W25P80. > They are formally NexFlash NX25P80, NX25P16 and NX25P32. > > I've google for the W25P08, it looks like that Windond did have > some legacy small SPI flash: W25P01, W25P02 .. W25P16. > I guess it's a different production line... > > BTW I don't have these chips and corresponding datasheet, too.
Ok. Can you use the commit msg header as "sf: winbond: " Which is used for winbond mtd driver since from long, of-course not a big deal and also mentioned atleast single line message on body. Simple recommendation here:. "Add support for Winbond's W25PXX SPI flash. These devices is used on Faraday A369 evaluation board" Thanks, Jagan. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
