2013/5/23 Jagan Teki <[email protected]>: > On Thu, May 23, 2013 at 3:24 PM, Kuo-Jung Su <[email protected]> wrote: >> 2013/5/23 Jagan Teki <[email protected]>: >>> Hi, >>> >>> On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <[email protected]> wrote: >>>> 2013/5/22 Jagan Teki <[email protected]>: >>>>> Hi, >>>>> >>>>> I have a simple question like these parts are legacy flashes i guess. >>>>> Could you please tell me on which boards these were used? >>>>> >>>> >>>> It's used on Faraday A369 evaluation board. >>>> However the u-boot source codes for A369 is still waiting for approval. >>>> Here is the link to u-boot patchwork: >>> >>> Ok, Thanks for your information. >>> >>>> >>>> http://patchwork.ozlabs.org/patch/242006/ >>>> >>>>> Thanks, >>>>> Jagan. >>>>> >>>>> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <[email protected]> wrote: >>>>>> From: Kuo-Jung Su <[email protected]> >>>>>> >>>>>> Signed-off-by: Kuo-Jung Su <[email protected]> >>>>>> --- >>>>>> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >>>>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >>>>>> index 2716209..2a27837 100644 >>>>>> --- a/drivers/mtd/spi/winbond.c >>>>>> +++ b/drivers/mtd/spi/winbond.c >>>>>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >>>>>> >>>>>> static const struct winbond_spi_flash_params winbond_spi_flash_table[] >>>>>> = { >>>>>> { >>>>>> + .id = 0x2014, >>>>>> + .nr_blocks = 16, >>>>>> + .name = "W25P80", >>> >>> W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08? >>> ofcourse, I have seen the same on datasheet as well. >>> >> >> It's W25P80. >> They are formally NexFlash NX25P80, NX25P16 and NX25P32. >> >> I've google for the W25P08, it looks like that Windond did have >> some legacy small SPI flash: W25P01, W25P02 .. W25P16. >> I guess it's a different production line... >> >> BTW I don't have these chips and corresponding datasheet, too. > > Ok. > > Can you use the commit msg header as > "sf: winbond: " > Which is used for winbond mtd driver since from long, of-course not a > big deal and > also mentioned atleast single line message on body. >
Sure, I'll re-format the patch and re-post again. > Simple recommendation here:. > "Add support for Winbond's W25PXX SPI flash. > These devices is used on Faraday A369 evaluation board" > Thanks. It's pretty helpful to me, because my English is really terrible. :) > Thanks, > Jagan. -- Best wishes, Kuo-Jung Su _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
