On Fri, May 24, 2013 at 05:17:48PM -0500, Andy Fleming wrote: > The following changes since commit 53237afe5b64abe7b17fbfed958f3dc83f503ffa: > > cmd_mem: fix cp command (2013-05-24 10:38:08 -0400) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-mpc85xx.git master > > for you to fetch changes up to a71d45d706a5b51c348160163b6c159632273fed: > > powerpc/mpc85xx: Clear L1 D-cache lock (2013-05-24 16:54:14 -0500) > > ---------------------------------------------------------------- > Ed Swarthout (2): > powerpc/qixis: add clock measurement registers > powerpc/t4qds: use clock measurement for sysclk and ddr clock > > James Yang (2): > Enable L2 cache parity/ECC error checking > Add e6500 L2 replacement policy selection > > Poonam Aggrwal (1): > powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h > > Ruchika Gupta (1): > SECURE BOOT - Removed deletion of TLB entries code > > Shaohui Xie (6): > net/phy: fix select line for TN80xx > T4240/ramboot: enable PBL tool for T4240 > powerpc/p5040: enable NAND, SD, SPI boot support > powerpc/p5040: enable PBL tool support > powerpc/p2041: fix serdes reference clock frequency display for PC board > powerpc/p5040: fix mdio mux for 10G port > > Shaveta Leekha (2): > powerpc/b4860: fix for Serdes connectivity to SFP's > powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple > > Shengzhou Liu (1): > powerpc/t4240qds: fix PHY reset timeout issue > > Stephen George (1): > board/t4240qds, b4860qds: LAW/TLB for DCSR set to size 32M > > Suresh Gupta (1): > Enable XAUI interface for B4860QDS > > Xie Xiaobo (1): > sf: spansion: Add support for S25FL128S > > York Sun (10): > common: Update cmd_bdinfo for PPC > powerpc/t4240qds: Add board detail for bdinfo command > powerpc/mpc85xx: check if core is disabled for showing status > powerpc/t4240qds: Add VDD override > powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h > powerpc/mpc8xxx: Add T1040 and variant SoCs > powerpc/chassis2: Change core numbering scheme > powerpc/mpc8xxx: Allow DDR overclock > powerpc/t4qds: Add SW7[4] in the DIP switch display > powerpc/mpc85xx: Clear L1 D-cache lock > > arch/powerpc/cpu/mpc85xx/Makefile | 3 + > arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- > arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 7 - > arch/powerpc/cpu/mpc85xx/mp.c | 2 + > arch/powerpc/cpu/mpc85xx/release.S | 41 +++-- > arch/powerpc/cpu/mpc85xx/speed.c | 20 +-- > arch/powerpc/cpu/mpc85xx/start.S | 4 +- > arch/powerpc/cpu/mpc85xx/t1040_ids.c | 135 +++++++++++++++ > arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 93 +++++++++++ > arch/powerpc/cpu/mpc8xxx/cpu.c | 59 ++++++- > .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 2 - > arch/powerpc/include/asm/config_mpc85xx.h | 98 +++++------ > arch/powerpc/include/asm/fsl_law.h | 2 + > arch/powerpc/include/asm/fsl_secure_boot.h | 10 -- > arch/powerpc/include/asm/fsl_serdes.h | 8 + > arch/powerpc/include/asm/immap_85xx.h | 29 ++-- > arch/powerpc/include/asm/processor.h | 17 ++ > board/freescale/b4860qds/b4860qds.c | 6 +- > board/freescale/b4860qds/b4860qds_crossbar_con.h | 31 ++-- > board/freescale/b4860qds/eth_b4860qds.c | 35 ++++ > board/freescale/b4860qds/law.c | 6 +- > board/freescale/b4860qds/tlb.c | 2 +- > board/freescale/common/qixis.h | 6 +- > board/freescale/corenet_ds/eth_superhydra.c | 8 +- > board/freescale/corenet_ds/rcw_p5040ds.cfg | 11 ++ > board/freescale/p2041rdb/p2041rdb.c | 11 ++ > board/freescale/t4qds/eth.c | 19 ++- > board/freescale/t4qds/law.c | 3 +- > board/freescale/t4qds/t4_pbi.cfg | 36 ++++ > board/freescale/t4qds/t4_rcw.cfg | 7 + > board/freescale/t4qds/t4qds.c | 172 > +++++++++++++++++++- > board/freescale/t4qds/tlb.c | 2 +- > boards.cfg | 3 + > common/cmd_bdinfo.c | 5 + > doc/README.b4860qds | 4 +- > doc/README.t4240qds | 26 ++- > drivers/mtd/spi/spansion.c | 2 +- > drivers/net/fm/b4860.c | 6 +- > drivers/net/phy/teranetics.c | 16 +- > include/configs/B4860QDS.h | 16 +- > include/configs/corenet_ds.h | 2 + > include/configs/t4qds.h | 3 +- > 42 files changed, 805 insertions(+), 165 deletions(-) > create mode 100644 arch/powerpc/cpu/mpc85xx/t1040_ids.c > create mode 100644 arch/powerpc/cpu/mpc85xx/t1040_serdes.c > create mode 100644 board/freescale/corenet_ds/rcw_p5040ds.cfg > create mode 100644 board/freescale/t4qds/t4_pbi.cfg > create mode 100644 board/freescale/t4qds/t4_rcw.cfg
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot