On 05/23/2013 04:52:26 AM, Jérôme Arzel wrote:
Hi all,
I have an issue when I compile U-Boot for my target machine (P1022DS,
36-bit).
Here is the error message:
release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between
0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between
0x00000000 and 0x0000ffff)
(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
And here is the code for the first error (line 150):
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
/* get our PIR to figure out our table entry */
lis r3,toreset(__spin_table_addr)@h
ori r3,r3,toreset(__spin_table_addr)@l
I don't really know why it doesn't work, but I think
that "ori" is inappropried, the immediate value must be a 16-bit
value.
I use GCC 4.7.3, compiled in x86_64 for target
powerpc-none-linux-gnuspe.
My U-Boot come from the repository, but older versions fail too.
This appears to be a binutils bug, introduced in 2.23.2. The attached
test program gives a similar error on 2.23.2, but 2.23.1 is OK.
I've filed it here: http://sourceware.org/bugzilla/show_bug.cgi?id=15557
-Scott
ori 3,3,(y-x+0x8000)@l
x:
y:
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
