Binutils 2.23.1 and the patch(es) for 2.23.2 work well. Thank you for your help.
Jérôme On 05/31/2013 08:20:00 PM, Scott Wood wrote: > > On 05/23/2013 04:52:26 AM, Jérôme Arzel wrote: > > Hi all, > > > > I have an issue when I compile U-Boot for my target machine > > (P1022DS, > > 36-bit). > > Here is the error message: > > > > release.S: Assembler messages: > > release.S:154: Error: operand out of range (0xfffff144 is not > > between > > 0x00000000 and 0x0000ffff) > > release.S:286: Error: operand out of range (0xfffff144 is not > > between > > 0x00000000 and 0x0000ffff) > > release.S:311: Error: operand out of range (0xfffff140 is not > > between > > 0x00000000 and 0x0000ffff) > > > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S) > > > > And here is the code for the first error (line 150): > > > > #define toreset(x) (x - __secondary_start_page + 0xfffff000) > > > > /* get our PIR to figure out our table entry */ > > lis r3,toreset(__spin_table_addr)@h > > ori r3,r3,toreset(__spin_table_addr)@l > > > > I don't really know why it doesn't work, but I think > > that "ori" is inappropried, the immediate value must be a 16-bit > > value. > > > > I use GCC 4.7.3, compiled in x86_64 for target > > powerpc-none-linux-gnuspe. > > My U-Boot come from the repository, but older versions fail too. > > This appears to be a binutils bug, introduced in 2.23.2. The > attached > test program gives a similar error on 2.23.2, but 2.23.1 is OK. > > I've filed it here: > http://sourceware.org/bugzilla/show_bug.cgi?id=15557 > > -Scott _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
