On 17/06/13 15:43, Mark Jackson wrote: > On 13/05/13 19:28, Tom Rini wrote: >> From: Steve Kipisz <s-kipi...@ti.com> >> >> NOR requires that s_init be within the first 4KiB of the image so that >> we can perform the rest of the required pinmuxing to talk with the rest >> of NOR that we are found on. When NOR_BOOT is set we save our >> environment in NOR at 512KiB and a redundant copy at 768KiB. We avoid >> using SPL for this case and u-boot.bin is written directly to the start >> of NOR. > > I'm trying to get this up and running our NanoBone platform, but I'm having > no success.
Just an update ... I now have it working ... yay !! The main (and possibly the *only*) culprit was that SYSBOOT[8] (which selects 8/16bit mode) was being incorrectly influenced by a hardware fault. I have pulled quite a few patches from various places, some of which might not be required. Now I have a working base, I'll work out what is needed on top of Tom's original patch set. Thanks for everyone's support. Mark J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot