This patchset implements support for two boards which I have. They have some specific hardware requirements, so they are a nice benchmark for U-Boot on MXS. The patchset can be broken into two parts:
First six patches add support for SanDisk Sansa Fuze+ and Creative X-Fi3, both boards based on STMP3780. Note that the i.MX23 is a rebranded STMP3780 with updated BootROM. The second part, consisting of five patches, adds smaller 4x6 font pulled from Linux kernel and fixes CFB console to handle this font correctly. NOTE: This patchset depends on http://patchwork.ozlabs.org/patch/263488/ , which will hopefully be applied shortly. Marek Vasut (11): dma: apbh: Add special circular mode for LCD video: Allocate the MXSFB framebuffer aligned video: Add System-Mode configuration hook into mxsfb video: Implement continuous screen refresh for SmartLCD into mxsfb ARM: mxs: Add Creative ZEN XFi3 board ARM: mxs: Add SanDisk Sansa Fuze+ board video: Encapsulate font in video_font_data.h video: Add small 4x6 font from Linux video: Fix cfb_console for 4-bit wide font ARM: mxs: Enable 4x6 font for X-Fi3 ARM: mxs: Enable 4x6 font for Fuze+ MAINTAINERS | 2 + arch/arm/include/asm/imx-common/dma.h | 2 + arch/powerpc/cpu/mpc8xx/video.c | 1 - board/creative/xfi3/Makefile | 47 + board/creative/xfi3/spl_boot.c | 150 +++ board/creative/xfi3/xfi3.c | 221 +++ board/sandisk/sansa_fuze_plus/Makefile | 47 + board/sandisk/sansa_fuze_plus/sfp.c | 386 ++++++ board/sandisk/sansa_fuze_plus/spl_boot.c | 155 +++ boards.cfg | 2 + common/lcd.c | 1 - drivers/dma/apbh_dma.c | 22 + drivers/video/cfb_console.c | 22 +- drivers/video/mxsfb.c | 45 +- drivers/video/sed156x.c | 1 - include/configs/sansa_fuze_plus.h | 84 ++ include/configs/xfi3.h | 83 ++ include/video_font.h | 9 +- include/video_font_4x6.h | 2154 ++++++++++++++++++++++++++++++ include/video_font_data.h | 5 + 20 files changed, 3430 insertions(+), 9 deletions(-) create mode 100644 board/creative/xfi3/Makefile create mode 100644 board/creative/xfi3/spl_boot.c create mode 100644 board/creative/xfi3/xfi3.c create mode 100644 board/sandisk/sansa_fuze_plus/Makefile create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c create mode 100644 include/configs/sansa_fuze_plus.h create mode 100644 include/configs/xfi3.h create mode 100644 include/video_font_4x6.h Cc: Anatolij Gustschin <ag...@denx.de> Cc: Fabio Estevam <fabio.este...@freescale.com> Cc: Otavio Salvador <ota...@ossystems.com.br> Cc: Stefano Babic <sba...@denx.de> -- 1.7.10.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
