Make multiple USB controllers work inside u-boot by doing the
following:
- Defining max. no of USB controllers for each soc
- Defining proper base address for each controller
so that initialization code can work for each of them
Ramneek Mehresh (2):
powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs
powerpc/usb:Differentiate USB controller base address
arch/powerpc/cpu/mpc83xx/cpu_init.c | 2 +-
arch/powerpc/cpu/mpc8xxx/fdt.c | 6 ++++--
arch/powerpc/include/asm/config_mpc85xx.h | 24 ++++++++++++++++++++++++
arch/powerpc/include/asm/immap_512x.h | 6 +++---
arch/powerpc/include/asm/immap_83xx.h | 18 ++++++++++++------
arch/powerpc/include/asm/immap_85xx.h | 9 +++++----
drivers/usb/host/ehci-fsl.c | 15 +++++++++++++--
drivers/usb/host/ehci-mpc512x.c | 4 ++--
include/usb/ehci-fsl.h | 13 ++++++++++---
9 files changed, 74 insertions(+), 23 deletions(-)
--
1.7.11.7
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
