Hi Giuseppe, On Mon, Nov 11, 2013 at 3:11 PM, Giuseppe Pagano <giuseppe.pag...@seco.com> wrote: > Previous uDoo configuration adopts register settings for DDR3, clock, muxing, > etc. taken from Nitrogen6x. uDoo schematics is rather different from that > board, and it needs customized setting for most of the registers. > All this changes can be considered atomical since it is part of initial > support of the board. > > Patch changes uDoo configuration files path to a specific one, and adopt > optimized value for every configured register. > > Signed-off-by: Giuseppe Pagano <giuseppe.pag...@seco.com> > CC: Stefano Babic <sba...@denx.de> > CC: Fabio Estevam <fabio.este...@freescale.com>
Tested-by: Fabio Estevam <fabio.este...@freescale.com> Thanks. Only one minor nit below: > --- > board/udoo/1066mhz_4x256mx16.cfg | 56 ++++++++++++++++++++++++ > board/udoo/clocks.cfg | 32 ++++++++++++++ > board/udoo/ddr-setup.cfg | 87 > ++++++++++++++++++++++++++++++++++++++ > board/udoo/udoo.cfg | 29 +++++++++++++ > boards.cfg | 2 +- > 5 files changed, 205 insertions(+), 1 deletion(-) > create mode 100644 board/udoo/1066mhz_4x256mx16.cfg > create mode 100644 board/udoo/clocks.cfg > create mode 100644 board/udoo/ddr-setup.cfg > create mode 100644 board/udoo/udoo.cfg > > diff --git a/board/udoo/1066mhz_4x256mx16.cfg > b/board/udoo/1066mhz_4x256mx16.cfg > new file mode 100644 > index 0000000..539e3f6 > --- /dev/null > +++ b/board/udoo/1066mhz_4x256mx16.cfg > @@ -0,0 +1,56 @@ > +/* > + * Copyright (C) 2013 Boundary Devices > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > + No need to add two lines here. One line is enough. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
