Hi Giuseppe, On 11/11/2013 18:11, Giuseppe Pagano wrote: > Previous uDoo configuration adopts register settings for DDR3, clock, muxing, > etc. taken from Nitrogen6x. uDoo schematics is rather different from that > board, and it needs customized setting for most of the registers. > All this changes can be considered atomical since it is part of initial > support of the board. > > Patch changes uDoo configuration files path to a specific one, and adopt > optimized value for every configured register. > > Signed-off-by: Giuseppe Pagano <giuseppe.pag...@seco.com> > CC: Stefano Babic <sba...@denx.de> > CC: Fabio Estevam <fabio.este...@freescale.com> > ---
> diff --git a/boards.cfg b/boards.cfg > index cec154b..1863f2a 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -288,7 +288,7 @@ Active arm armv7 mx5 freescale > mx53smd > Active arm armv7 mx5 genesi mx51_efikamx > mx51_efikamx > mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg > - > Active arm armv7 mx5 genesi mx51_efikamx > mx51_efikasb > mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg > - > Active arm armv7 mx5 ttcontrol vision2 > vision2 > vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg > Stefano Babic > <sba...@denx.de> > -Active arm armv7 mx6 - udoo > udoo_quad > udoo:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024 > Fabio Estevam <fabio.este...@freescale.com> > +Active arm armv7 mx6 - udoo > udoo_quad > udoo:IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024 Fabio Estevam > <fabio.este...@freescale.com> Fabio's mail address is corrupted by some tool. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
