Hi Christian / Andy, On Mon, Sep 2, 2013 at 8:16 PM, Andy Fleming <aflem...@gmail.com> wrote: > On Mon, Sep 2, 2013 at 7:30 AM, Christian Gmeiner < > christian.gmei...@gmail.com> wrote: > >> This patch is needed if the MAC is directly connected to a ethernet switch. >> In my case the FEC MAC is connected to a Micrel KSZ8895. All I need to to >> is configure my fixed phy/link like: >> >> #define IMX_FEC_BASE ENET_BASE_ADDR >> #define CONFIG_FEC_XCV_TYPE MII100 >> #define CONFIG_ETHPRIME "FEC" >> #define CONFIG_FEC_MXC_PHYADDR 0x5 >> #define CONFIG_PHYLIB >> #define CONFIG_PHY_FIXED >> #define CONFIG_PHY_FIXED_SPEED SPEED_100 >> #define CONFIG_PHY_FIXED_DUPLEX DUPLEX_FULL >> >> Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com> >> > > This doesn't work very well if you ever have more than one switch, or need > more than one fixed link for some other reason. It needs to be possible to > instantiate the fixed PHY interface(s) at runtime, IMO.
Do you plan to implement this in a more flexible way? Thanks, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
