Hi Joe > On Mon, Sep 2, 2013 at 8:16 PM, Andy Fleming <aflem...@gmail.com> wrote: >> On Mon, Sep 2, 2013 at 7:30 AM, Christian Gmeiner < >> christian.gmei...@gmail.com> wrote: >> >>> This patch is needed if the MAC is directly connected to a ethernet switch. >>> In my case the FEC MAC is connected to a Micrel KSZ8895. All I need to to >>> is configure my fixed phy/link like: >>> >>> #define IMX_FEC_BASE ENET_BASE_ADDR >>> #define CONFIG_FEC_XCV_TYPE MII100 >>> #define CONFIG_ETHPRIME "FEC" >>> #define CONFIG_FEC_MXC_PHYADDR 0x5 >>> #define CONFIG_PHYLIB >>> #define CONFIG_PHY_FIXED >>> #define CONFIG_PHY_FIXED_SPEED SPEED_100 >>> #define CONFIG_PHY_FIXED_DUPLEX DUPLEX_FULL >>> >>> Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com> >>> >> >> This doesn't work very well if you ever have more than one switch, or need >> more than one fixed link for some other reason. It needs to be possible to >> instantiate the fixed PHY interface(s) at runtime, IMO. > > Do you plan to implement this in a more flexible way? >
I am working on the final version of u-boot for two devices. If i still need it to get networking running I will send a patch. greets -- Christian Gmeiner, MSc _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot