On 2013-12-02 15:47, Roger Quadros wrote: > Hi, > > This series > > - Fixes OMAP4 Panda USB device detection issues > - Gets rid of ULPI reset errors on Beagle & Panda > > --- > cheers, > -roger > > Roger Quadros (3): > usb: ehci-omap: Reset the USB Host OMAP module > omap3_beagle: Don't use ulpi_reset > omap4_panda: Don't use ulpi_reset > > drivers/usb/host/ehci-omap.c | 57 > +++++++++++++++++++++++++++++++----------- > include/configs/omap3_beagle.h | 3 --- > include/configs/omap4_panda.h | 3 --- > 3 files changed, 42 insertions(+), 21 deletions(-)
Tested on OMAP4 Panda and OMAP3 Beagle xM.
Usually seems to work, but on Panda I still sometimes see that the eth
is not found:
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
No ethernet found.
Tomi
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
