Hi, On 12/04/2013 11:58 AM, Tomi Valkeinen wrote: > On 2013-12-02 15:47, Roger Quadros wrote: >> Hi, >> >> This series >> >> - Fixes OMAP4 Panda USB device detection issues >> - Gets rid of ULPI reset errors on Beagle & Panda >> >> --- >> cheers, >> -roger >> >> Roger Quadros (3): >> usb: ehci-omap: Reset the USB Host OMAP module >> omap3_beagle: Don't use ulpi_reset >> omap4_panda: Don't use ulpi_reset >> >> drivers/usb/host/ehci-omap.c | 57 >> +++++++++++++++++++++++++++++++----------- >> include/configs/omap3_beagle.h | 3 --- >> include/configs/omap4_panda.h | 3 --- >> 3 files changed, 42 insertions(+), 21 deletions(-) > > Tested on OMAP4 Panda and OMAP3 Beagle xM. > > Usually seems to work, but on Panda I still sometimes see that the eth > is not found: > > (Re)start USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > scanning usb for ethernet devices... 0 Ethernet Device(s) found > No ethernet found.
Thanks for the tests. I'll need to investigate more, but the patches are good enough to go as they are. cheers, -roger _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
