Dear Jaehoon Chung,

> -----Original Message-----
> From: Jaehoon Chung [mailto:[email protected]]
> Sent: Thursday, December 26, 2013 9:03 AM
> To: Piotr Wilczek; [email protected]
> Cc: Kyungmin Park
> Subject: Re: [U-Boot] [PATCH] board:trats2: fix default partitions and
> mmc env
> 
> Hi, Piotr.
> 
> On 12/19/2013 11:09 PM, Piotr Wilczek wrote:
> > This patch add uuid disk to defualt partions necessary to restore gpt
> > partitions and fixes mmcdev environmental variable.
> >
> > Signed-off-by: Piotr Wilczek <[email protected]>
> > Signed-off-by: Kyungmin Park <[email protected]>
> > ---
> >  include/configs/trats2.h |    3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/configs/trats2.h b/include/configs/trats2.h
> index
> > 5d86a3d..4c0068b 100644
> > --- a/include/configs/trats2.h
> > +++ b/include/configs/trats2.h
> > @@ -160,6 +160,7 @@
> >  #define PARTS_UMS          "ums"
> >
> >  #define PARTS_DEFAULT \
> > +   "uuid_disk=${uuid_gpt_disk};" \
> >
>       "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA
> "};" \
> >     "name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
> >     "name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};"
> \
> > @@ -201,7 +202,7 @@
> >             "${kernelname}\0" \
> >     "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
> >             "${fdtfile}\0" \
> > -   "mmcdev=CONFIG_MMC_DEFAULT_DEV\0" \
> > +   "mmcdev=0\0" \
> What difference is CONFIG_MMC_DEFAULT_DEV and 0?
> CONFIG_MMC_DEFAULT_DEV 0 is defined. Maybe, mmcdev is set to 0, isn't?
> (It recognized that CONFIG_MMC_DEFAULT_DEV isn't defined.)
> 
You are right, CONFIG_MMC_DEFAULT_DEV is set 0. I should have used
__stringify function originally.
Please see V2:
http://patchwork.ozlabs.org/patch/305737/

Please also see the following patch:
http://patchwork.ozlabs.org/patch/302903/

Both are very important fixes for current release.

> Best Regards,
> Jaehoon Chung
> >     "mmcbootpart=2\0" \
> >     "mmcrootpart=5\0" \
> >     "opts=always_resume=1\0" \
> >

Best regards,
Piotr Wilczek


_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to