On Mon, 2014-04-21 at 10:46 +0530, Prabhakar Kushwaha wrote: > qe_init() does not use data copied from NAND. Thise code is not tested or > complied causing compilation error during NAND boot > > So, remove QE firmware copy from NAND to ddr. > > Signed-off-by: Prabhakar Kushwaha <[email protected]>
Where does the QE firmware come from when booting from NAND? -Scott _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
