reset_phy was used to force the macb to be always init in order to set the enetaddr in the hw registers which now done at the eth_initialize
This also reduce the boot time Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]> Cc: Stelian Pop <[email protected]> Cc: Nicolas Ferre <[email protected]> --- board/afeb9260/afeb9260.c | 16 ---------------- board/atmel/at91cap9adk/at91cap9adk.c | 16 ---------------- board/atmel/at91sam9260ek/at91sam9260ek.c | 16 ---------------- board/atmel/at91sam9263ek/at91sam9263ek.c | 16 ---------------- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 --- board/ronetix/pm9263/pm9263.c | 16 ---------------- include/configs/afeb9260.h | 1 - include/configs/at91cap9adk.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/pm9263.h | 1 - 11 files changed, 0 insertions(+), 88 deletions(-) diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index 024db2b..6f74012 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -33,10 +33,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <netdev.h> -#include <net.h> -#endif DECLARE_GLOBAL_DATA_PTR; @@ -160,19 +157,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 9f73df6..2fd20db 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -35,9 +35,6 @@ #include <asm/arch/hardware.h> #include <lcd.h> #include <atmel_lcdc.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif #include <netdev.h> #define MP_BLOCK_3_BASE 0xFDF00000 @@ -336,19 +333,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 6bd3b44..8d01c4f 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -32,9 +32,6 @@ #include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -172,19 +169,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 57d5c95..e19fd50 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -36,9 +36,6 @@ #include <asm/arch/hardware.h> #include <lcd.h> #include <atmel_lcdc.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -259,19 +256,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index 7013ba2..94bcc17 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -34,9 +34,6 @@ #include <asm/arch/io.h> #include <lcd.h> #include <atmel_lcdc.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif DECLARE_GLOBAL_DATA_PTR; diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index d24ef9a..4927edd 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -39,9 +39,6 @@ #include <lcd.h> #include <atmel_lcdc.h> #include <dataflash.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -356,19 +353,6 @@ int dram_init(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(gd->bd); -#endif -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index c5134a2..2e891b0 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -114,7 +114,6 @@ /* Ethernet */ #define CONFIG_MACB 1 #undef CONFIG_RMII /* We have full MII there */ -#define CONFIG_RESET_PHY_R 1 #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index b2e6d7d..d3d2059 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -138,7 +138,6 @@ #define CONFIG_RMII 1 #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index e46c9d6..68e45a1 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -134,7 +134,6 @@ #define CONFIG_RMII 1 #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index d03ecee..016ec58 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -144,7 +144,6 @@ #define CONFIG_RMII 1 #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 0db17b3..ffb40be 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -232,7 +232,6 @@ #define CONFIG_RMII 1 #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL -- 1.6.1.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
