Seems like the controller doesn't support the flag. None of the hi-speed cards I've tried could be read, while they successfully worked with the quirk enabled.
Signed-off-by: Lubomir Rintel <[email protected]> --- drivers/mmc/bcm2835_sdhci.c | 2 +- include/configs/rpi_b.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 54cfabf..82079d6 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -179,7 +179,7 @@ int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq) host->name = "bcm2835_sdhci"; host->ioaddr = (void *)regbase; host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B | - SDHCI_QUIRK_WAIT_SEND_CMD; + SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; host->ops = &bcm2835_ops; diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index ed8b4df..1bcb798 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -225,6 +225,8 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG +#define CONFIG_SYS_GENERIC_BOARD + #include <config_distro_defaults.h> /* Some things don't make sense on this HW or yet */ -- 1.9.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
