Hello Minkyu,
On 07/26/2014 11:07 AM, Minkyu Kang wrote:
Dear Przemyslaw Marczak,
On 19 July 2014 00:29, Przemyslaw Marczak <[email protected]
<mailto:[email protected]>> wrote:
This board file supports standard features of Odroid X2 and U3 boards:
- Exynos4412 core clock set to 1000MHz and MPLL peripherial clock
set to 800MHz,
- MAX77686 power regulator,
- USB PHY,
- enable XCL205 - power for board peripherials
- check board type: U3 or X2.
- enable Odroid U3 FAN cooler
Signed-off-by: Przemyslaw Marczak <[email protected]
<mailto:[email protected]>>
Cc: Minkyu Kang <[email protected] <mailto:[email protected]>>
Cc: Tom Rini <[email protected] <mailto:[email protected]>>
---
Changes v2:
- enable fan on odroid U3
Changes v3:
- odroid.c: clean up board name related code
- odroid.c: remove static from set_board_type()
- odroid.c: add implementation of functions: get_dfu_alt_*
- odroid.c: include misc.h
Changes v4:
- odroid.c: dfu_get_alt_boot: add call get_boot_mode()
Changes v5:
- odroid.c: set_board_type: change mdelay to sdelay, define XCL205
GPIO config
- odroid.c: board_gpio_init(): fix OTG for Odroid U3+
- odroid.c: reserve the last 1 MB of dram for secure firmware
- odroid.c: board_clock_init(): code cleanup
- odroid.c: get_dfu_alt_boot(): remove setenv()
- odroid.c: remove get_board_name() function definition
- odroid.c: add enum ODROID_TYPES
---
board/samsung/odroid/Makefile | 8 +
board/samsung/odroid/odroid.c | 470
++++++++++++++++++++++++++++++++++++++++++
board/samsung/odroid/setup.h | 255 +++++++++++++++++++++++
3 files changed, 733 insertions(+)
create mode 100644 board/samsung/odroid/Makefile
create mode 100644 board/samsung/odroid/odroid.c
create mode 100644 board/samsung/odroid/setup.h
diff --git a/board/samsung/odroid/setup.h b/board/samsung/odroid/setup.h
new file mode 100644
index 0000000..f6acbff
--- /dev/null
+++ b/board/samsung/odroid/setup.h
@@ -0,0 +1,255 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Przemyslaw Marczak <[email protected]
<mailto:[email protected]>>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ODROIDU3_SETUP__
+#define __ODROIDU3_SETUP__
+
+/* A/M PLL_CON0 */
+#define SDIV(x) (x & 0x7)
In this file, x should be wrapped with ().
Please fix it.
Ok, I will fix this.
+#define PDIV(x) ((x & 0x3f) << 8)
+#define MDIV(x) ((x & 0x3ff) << 16)
+#define FSEL(x) ((x & 0x1) << 27)
+#define PLL_LOCKED_BIT (0x1 << 29)
+#define PLL_ENABLE(x) ((x & 0x1) << 31)
+
+/* CLK_SRC_CPU */
+#define MUX_APLL_SEL(x) (x & 0x1)
+#define MUX_CORE_SEL(x) ((x & 0x1) << 16)
+#define MUX_HPM_SEL(x) ((x & 0x1) << 20)
+#define MUX_MPLL_USER_SEL_C(x) ((x & 0x1) << 24)
+
Others are looks good to me.
Thanks,
Minkyu Kang.
--
from. prom.
www.promsoft.net <http://www.promsoft.net>
Thank you,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
[email protected]
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
