On Wed, Sep 10, 2014 at 3:16 AM, Peng Fan <peng....@freescale.com> wrote: > From: Peng Fan <van.free...@gmail.com> > > Add QuadSPI support for mx6sxsabresd board. > > There are two 16MB S25FL128S flashes on board. They are connected to > QSPI2 interface. i.MX6SX supports two QuadSPI interfaces, QSPI1/2. > The two flash devices are connected to A1/B1 of QSPI2. > > Signed-off-by: Peng Fan <van.free...@gmail.com> > --- > arch/arm/cpu/armv7/mx6/clock.c | 50 > +++++++++++++++++++++++++++++ > arch/arm/include/asm/arch-mx6/clock.h | 3 ++ > board/freescale/mx6sxsabresd/mx6sxsabresd.c | 40 +++++++++++++++++++++++ > drivers/spi/fsl_qspi.c | 30 +++++++++++++++++ > include/configs/mx6sxsabresd.h | 14 ++++++++
I would split this in two patches: one that adds qspi support for the mx6solox SoC and another one that adds qspi support to the mx6sxsabresd board. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot