On 09/10/2014 08:40 PM, Fabio Estevam wrote:
> On Wed, Sep 10, 2014 at 3:16 AM, Peng Fan <peng....@freescale.com> wrote:
>> From: Peng Fan <van.free...@gmail.com>
>>
>> Add QuadSPI support for mx6sxsabresd board.
>>
>> There are two 16MB S25FL128S flashes on board. They are connected to
>> QSPI2 interface. i.MX6SX supports two QuadSPI interfaces, QSPI1/2.
>> The two flash devices are connected to A1/B1 of QSPI2.
>>
>> Signed-off-by: Peng Fan <van.free...@gmail.com>
>> ---
>>  arch/arm/cpu/armv7/mx6/clock.c              | 50 
>> +++++++++++++++++++++++++++++
>>  arch/arm/include/asm/arch-mx6/clock.h       |  3 ++
>>  board/freescale/mx6sxsabresd/mx6sxsabresd.c | 40 +++++++++++++++++++++++
>>  drivers/spi/fsl_qspi.c                      | 30 +++++++++++++++++
>>  include/configs/mx6sxsabresd.h              | 14 ++++++++
> 
> I would split this in two patches: one that adds qspi support for the
> mx6solox SoC and another one that adds qspi support to the
> mx6sxsabresd board.
ok. I'll correct this. Thanks for reviewing.

Regards,
Peng.
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to