Add I2C1 SDA/SCL pad settings for mx6 sololite
Signed-off-by: Ye.Li <[email protected]>
---
Changes since v1:
- None
Changes since v2:
- None
Changes since v3:
- Split the I2C1 pad settings to a new patch since it is board independent.
arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index 045ccc4..ac84270 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -34,5 +34,10 @@ enum {
MX6_PAD_FEC_REF_CLK__FEC_REF_OUT =
IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
MX6_PAD_FEC_RX_ER__GPIO_4_19 =
IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
MX6_PAD_FEC_TX_CLK__GPIO_4_21 =
IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
+
+ MX6_PAD_I2C1_SDA__I2C1_SDA =
IOMUX_PAD(0x0450, 0x0160, 0x10, 0x0720, 2, 0),
+ MX6_PAD_I2C1_SDA__GPIO_3_13 =
IOMUX_PAD(0x0450, 0x0160, 5, 0x0000, 0, 0),
+ MX6_PAD_I2C1_SCL__I2C1_SCL =
IOMUX_PAD(0x044C, 0x015C, 0x10, 0x071C, 2, 0),
+ MX6_PAD_I2C1_SCL__GPIO_3_12 =
IOMUX_PAD(0x044C, 0x015C, 5, 0x0000, 0, 0),
};
#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
--
1.7.4.1
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
