The pmic_spi_free function isn't ever used, and as the frameworks stand today, cannot be, so remove it. Integrate the probe function into pmic_reg as it's not really a "probe" today. Finally, add an err label for the common failure cases.
Cc: Lukasz Majewski <[email protected]> Cc: Przemyslaw Marczak <[email protected]> Cc: Stefano Babic <[email protected]> Signed-off-by: Tom Rini <[email protected]> --- drivers/power/power_spi.c | 33 ++++++++++----------------------- 1 file changed, 10 insertions(+), 23 deletions(-) diff --git a/drivers/power/power_spi.c b/drivers/power/power_spi.c index fb455a00..1e55446 100644 --- a/drivers/power/power_spi.c +++ b/drivers/power/power_spi.c @@ -17,27 +17,14 @@ static struct spi_slave *slave; -void pmic_spi_free(struct spi_slave *slave) -{ - if (slave) - spi_free_slave(slave); -} - -struct spi_slave *pmic_spi_probe(struct pmic *p) -{ - return spi_setup_slave(p->bus, - p->hw.spi.cs, - p->hw.spi.clk, - p->hw.spi.mode); -} - static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) { u32 pmic_tx, pmic_rx; u32 tmp; if (!slave) { - slave = pmic_spi_probe(p); + slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk, + p->hw.spi.mode); if (!slave) return -1; @@ -54,25 +41,25 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, - pmic_spi_flags)) { - spi_release_bus(slave); - return -1; - } + pmic_spi_flags)) + goto err; if (write) { pmic_tx = p->hw.spi.prepare_tx(reg, val, 0); tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, - pmic_spi_flags)) { - spi_release_bus(slave); - return -1; - } + pmic_spi_flags)) + goto err; } spi_release_bus(slave); *val = cpu_to_be32(pmic_rx); return 0; + +err: + spi_release_bus(slave); + return -1; } int pmic_reg_write(struct pmic *p, u32 reg, u32 val) -- 1.7.9.5 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
