On 11/15/2014 06:34 AM, Albert ARIBAUD wrote: > Hello nitin.g...@freescale.com, > > On Fri, 14 Nov 2014 14:13:02 -0600, nitin.g...@freescale.com > <nitin.g...@freescale.com> wrote: >> From: Nitin Garg <nitin.g...@freescale.com> >> >> This patch set adds i.MX6 thermal sensor driver >> and enables it for mx6sabre boards. Also adds >> various anadig bit definitions as required for >> upcoming drivers. >> >> Changes in v6: >> -Aligned imx thermal driver macro defines with kernel >> >> Changes in v5: >> -Don't modify the copyright of cpu.c and crm_regs.h file >> >> Changes in v4: >> -Added imx6 thermal sensor as a driver >> -Renamed the config define to be more meaningful >> -Move the clock code to clock.c >> -Reusing ocotp driver for reading fuse >> -Fix check for calibration fuse not programmed >> -Aligned the slope computation with kernel >> -Added Anadig register defines as seperate commit >> >> Changes in v3: >> -adds the mx6 thermal driver support >> -adds the mx6 thermal support to mx6sabresd board. >> >> Changes in v2: >> -run checkpatch and fix reported issues >> >> Nitin Garg (4): >> mx6: clock: Add api to enable pll3 >> mx6: thermal: Add i.MX6 CPU thermal sensor support >> mx6: thermal: Check cpu temperature via thermal sensor >> mx6: thermal: Enable thermal sensor for mx6 sabre boards. > > So, is it 5 as the cover letter says, or 4 as the patches say? If > actually 4 and only the cover letter is wrong, then there's no need to > repost. If actually 5, then please repost them all, renumbered > accordingly. > > Amicalement, >
Just the cover subject is wrong (0/5 should be 0/4). Thanks, _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot