From: Nitin Garg <nitin.g...@freescale.com> This patch set adds i.MX6 thermal sensor driver and enables it for mx6sabre boards. Also adds various anadig bit definitions as required for upcoming drivers.
Changes in v6: -Aligned imx thermal driver macro defines with kernel Changes in v5: -Don't modify the copyright of cpu.c and crm_regs.h file Changes in v4: -Added imx6 thermal sensor as a driver -Renamed the config define to be more meaningful -Move the clock code to clock.c -Reusing ocotp driver for reading fuse -Fix check for calibration fuse not programmed -Aligned the slope computation with kernel -Added Anadig register defines as seperate commit Changes in v3: -adds the mx6 thermal driver support -adds the mx6 thermal support to mx6sabresd board. Changes in v2: -run checkpatch and fix reported issues Nitin Garg (4): mx6: clock: Add api to enable pll3 mx6: thermal: Add i.MX6 CPU thermal sensor support mx6: thermal: Check cpu temperature via thermal sensor mx6: thermal: Enable thermal sensor for mx6 sabre boards. arch/arm/cpu/armv7/mx6/clock.c | 25 ++++++ arch/arm/imx-common/cpu.c | 6 ++ arch/arm/include/asm/arch-mx6/clock.h | 1 + drivers/Makefile | 1 + drivers/thermal/Makefile | 8 ++ drivers/thermal/imx_thermal.c | 144 +++++++++++++++++++++++++++++++++ include/configs/mx6sabre_common.h | 3 +- include/imx_thermal.h | 15 ++++ 8 files changed, 202 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/Makefile create mode 100644 drivers/thermal/imx_thermal.c create mode 100644 include/imx_thermal.h -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot