On 01/07/2015 03:12 AM, Pali Rohár wrote:
@Tom, Nishanth, or anybody from TI: how to check if omap device
type is HS in uboot? In linux kernel it is possible by:
if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { ... }
it should be.
CONTROL_STATUS register exists in almost all omap2+ devices.
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/mach-omap2/id.c#n53
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/mach-omap2/soc.h#n120
omap3 u-boot implements get_device_type
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/omap3/sys_info.c;h=bbb65bbe7263674c2b47b97ee05a9f588ed1c58f;hb=HEAD#l265
Macro HS_DEVICE could be used?
--
Regards,
Nishanth Menon
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
