On Thursday 08 January 2015 01:16:22 Nishanth Menon wrote:
> On 01/07/2015 03:12 AM, Pali Rohár wrote:
> > @Tom, Nishanth, or anybody from TI: how to check if omap
> > device type is HS in uboot? In linux kernel it is possible
> > by:
> >
> > if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { ... }
>
> it should be.
> CONTROL_STATUS register exists in almost all omap2+ devices.
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
> /tree/arch/arm/mach-omap2/id.c#n53
>
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
> /tree/arch/arm/mach-omap2/soc.h#n120
>
> omap3 u-boot implements get_device_type
>
> http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/cpu/armv7/o
> map3/sys_info.c;h=bbb65bbe7263674c2b47b97ee05a9f588ed1c58f;hb=
> HEAD#l265
>
> Macro HS_DEVICE could be used?
>
> --
> Regards,
> Nishanth MenonThanks, condition if (get_device_type() == HS_DEVICE) fixed problem with qemu. I will send patch to ML. -- Pali Rohár [email protected]
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
