[U-Boot] [PATCH 05/12] ARM: zynq: List nand, qspi and jtag boot modes

[Michal Simek]

Use full boot mode list in SPL.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm/cpu/armv7/zynq/spl.c             | 9 +++++++++
 arch/arm/include/asm/arch-zynq/hardware.h | 2 ++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
index 31627f970efb..3fb876d07ab8 100644
--- a/arch/arm/cpu/armv7/zynq/spl.c
+++ b/arch/arm/cpu/armv7/zynq/spl.c
@@ -46,12 +46,21 @@ u32 spl_boot_device(void)
                mode = BOOT_DEVICE_SPI;
                break;
 #endif
+       case ZYNQ_BM_NAND:
+               mode = BOOT_DEVICE_NAND;
+               break;
+       case ZYNQ_BM_NOR:
+               mode = BOOT_DEVICE_NOR;
+               break;
 #ifdef CONFIG_SPL_MMC_SUPPORT
        case ZYNQ_BM_SD:
                puts("mmc boot\n");
                mode = BOOT_DEVICE_MMC1;
                break;
 #endif
+       case ZYNQ_BM_JTAG:
+               mode = BOOT_DEVICE_RAM;
+               break;
        default:
                puts("Unsupported boot mode selected\n");
                hang();
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h 
b/arch/arm/include/asm/arch-zynq/hardware.h
index 2aede0c552c6..8dfedd7a94ce 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -28,7 +28,9 @@

 /* Bootmode setting values */
 #define ZYNQ_BM_MASK           0x7
+#define ZYNQ_BM_QSPI           0x1
 #define ZYNQ_BM_NOR            0x2
+#define ZYNQ_BM_NAND           0x4
 #define ZYNQ_BM_SD             0x5
 #define ZYNQ_BM_JTAG           0x0

--
1.8.2.3

pgpMWQI8b9YFP.pgp
Description: PGP signature

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot