Based on: "am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to env" (sha1: 73a27a84e58cb99b4e64ed6a35eab5bc61f44f29)
Fix filesystem specific commands for loading. Signed-off-by: Michal Simek <[email protected]> --- include/configs/zynq-common.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 3a62ec75dbc9..f968e7666dc1 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -100,6 +100,7 @@ # define CONFIG_DOS_PARTITION # define CONFIG_CMD_EXT4 # define CONFIG_CMD_EXT4_WRITE +# define CONFIG_CMD_FS_GENERIC #endif #define CONFIG_SYS_I2C_ZYNQ @@ -159,14 +160,14 @@ "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ "bootm ${load_addr}\0" \ "sdboot=echo Copying FIT from SD to RAM... && " \ - "fatload mmc 0 ${load_addr} ${fit_image} && " \ + "load mmc 0 ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ "jtagboot=echo TFTPing FIT to RAM... && " \ "tftpboot ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ "usbboot=if usb start; then " \ "echo Copying FIT from USB to RAM... && " \ - "fatload usb 0 ${load_addr} ${fit_image} && " \ + "load usb 0 ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ "fi\0" -- 1.8.2.3
pgp8p7TZeaQSS.pgp
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
