This clock is needed for systems using the USB2 device unit or the 2d graphics accelerator.
Signed-off-by: Daniel Mack <dan...@caiaq.de> --- include/asm-arm/arch-pxa/pxa-regs.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 5a0885a..1f81e11 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1952,6 +1952,7 @@ typedef void (*ExcpHndlr) (void) ; #define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ #define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ +#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ #define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ #define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ #define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ -- 1.6.3.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
