This patch set is to support buck regulator can working in different switching modes. To improve system efficiency the buck regulators can operate in different switching modes.
patch 1/3 is to add related bit definitions and registers. patch 2/3 is to implement the switching mode init function. patch 3/3 is to add related mode init function in board code. mx6slevk board is not included in this patch set, since power and i2c interface are not implemented for it. These patches are at: https://patchwork.ozlabs.org/patch/426961/ https://patchwork.ozlabs.org/patch/426962/ https://patchwork.ozlabs.org/patch/426963/ Added "Acked-by: Przemyslaw Marczak <[email protected]>" in this patch set. Added "Reviewed-by: Stefano Babic <[email protected]>" for patch 1/3. There is no major changes for this patch version. Only defined a macro SWITCH_SIZE to replace the constant in patch 2/3. Peng Fan (3): pmic:pfuz100 add switch mode and more registers pmic:pfuze implement pmic_mode_init imx:mx6 set normal APS and standby PFM mode board/freescale/common/pfuze.c | 37 ++++++++++++++++++ board/freescale/common/pfuze.h | 1 + board/freescale/mx6qsabreauto/mx6qsabreauto.c | 6 +++ board/freescale/mx6sabresd/mx6sabresd.c | 6 ++- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 6 ++- include/power/pfuze100_pmic.h | 55 +++++++++++++++++++++++++++ 6 files changed, 109 insertions(+), 2 deletions(-) -- 1.8.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
