On 27/01/2015 03:14, Peng Fan wrote:
> This patch is to implement pmic_mode_init function, and add prototype
> in header file.
> 
> This function is to set switching mode for pmic buck regulators to
> improve system efficiency.
> 
> Mode:
> OFF: The regulator is switched off and the output voltage is discharged.
> PFM: In this mode, the regulator is always in PFM mode, which
>      is useful at light loads for optimized efficiency.
> PWM: In this mode, the regulator is always in PWM mode operation
>      regardless of load conditions.
> APS: In this mode, the regulator moves automatically between
>      pulse skipping mode and PWM mode depending on load conditions.
> 
> Signed-off-by: Peng Fan <peng....@freescale.com>
> Acked-by: Przemyslaw Marczak <p.marc...@samsung.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to