Since i.MX6QP changes some CCM registers, so modify the clocks settings to
follow the hardware changes.
In c files, use runtime check and discard #ifdef.
A new CONFIG_MX6QP is introduced here and is used for the CCM difference,
only used in header files for different bits.
At default CONFIG_MX6Q is enabled along with the CONFIG_MX6QP.
Signed-off-by: Ye.Li <b37...@freescale.com>
Signed-off-by: Peng Fan <peng....@freescale.com>
---
Changes v2:
1. Remove #ifdef, but use runtime check
2. A few bit definitions are introduced in c files, because to other platforms
the macro will make compilation fail, also there are no other places refer
the bit macro definitions.
arch/arm/cpu/armv7/mx6/clock.c | 33 ++++++++++++++++++++++----------
arch/arm/cpu/armv7/mx6/soc.c | 5 ++++-
arch/arm/include/asm/arch-mx6/crm_regs.h | 33 +++++++++++++++++---------------
include/configs/mx6_common.h | 3 +++
4 files changed, 48 insertions(+), 26 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index ae99945..0d862b2 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -323,10 +323,13 @@ static u32 get_ipg_per_clk(void)
u32 reg, perclk_podf;
reg = __raw_readl(&imx_ccm->cscmr1);
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
- if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
- return MXC_HCLK; /* OSC 24Mhz */
-#endif
+ if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
+ is_mx6dqp()) {
+#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
+ if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
+ return MXC_HCLK; /* OSC 24Mhz */
+ }
+
perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK;
return get_ipg_clk() / (perclk_podf + 1);
@@ -337,10 +340,14 @@ static u32 get_uart_clk(void)
u32 reg, uart_podf;
u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
reg = __raw_readl(&imx_ccm->cscdr1);
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
- if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
- freq = MXC_HCLK;
-#endif
+
+ if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) ||
+ is_mx6dqp()) {
+#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
+ if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
+ freq = MXC_HCLK;
+ }
+
reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK;
uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
@@ -352,8 +359,14 @@ static u32 get_cspi_clk(void)
u32 reg, cspi_podf;
reg = __raw_readl(&imx_ccm->cscdr2);
- reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
- cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
+ cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
+
+ if (is_mx6dqp()) {
+#define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK (0x1 << 18)
+ if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
+ return MXC_HCLK / (cspi_podf + 1);
+ }
return decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
}
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 29de624..bcfa2f6 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -335,9 +335,12 @@ static void set_ahb_rate(u32 val)
static void clear_mmdc_ch_mask(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 reg;
+ reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- writel(0, &mxc_ccm->ccdr);
+ reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+ writel(reg, &mxc_ccm->ccdr);
}
static void init_bandgap(void)
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h
b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 887d048..2ff1005 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -113,7 +113,7 @@ struct mxc_ccm_reg {
#define MXC_CCM_CCR_WB_COUNT_MASK 0x7
#define MXC_CCM_CCR_WB_COUNT_OFFSET (1 << 16)
#define MXC_CCM_CCR_COSC_EN (1 << 12)
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6QP))
#define MXC_CCM_CCR_OSCNT_MASK 0x7F
#else
#define MXC_CCM_CCR_OSCNT_MASK 0xFF
@@ -123,6 +123,9 @@ struct mxc_ccm_reg {
/* Define the bits in register CCDR */
#define MXC_CCM_CCDR_MMDC_CH1_HS_MASK (1 << 16)
#define MXC_CCM_CCDR_MMDC_CH0_HS_MASK (1 << 17)
+#ifdef CONFIG_MX6QP
+#define MXC_CCM_CCDR_MMDC_CH1_AXI_ROOT_CG (1 << 18)
+#endif
/* Define the bits in register CSR */
#define MXC_CCM_CSR_COSC_READY (1 << 5)
@@ -196,7 +199,11 @@ struct mxc_ccm_reg {
#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_MASK (0x3 << 4)
#define MXC_CCM_CBCMR_GPU3D_CORE_CLK_SEL_OFFSET 4
#ifndef CONFIG_MX6SX
+#ifdef CONFIG_MX6QP
+#define MXC_CCM_CBCMR_PRE_CLK_SEL (1 << 1)
+#else
#define MXC_CCM_CBCMR_GPU3D_AXI_CLK_SEL (1 << 1)
+#endif
#define MXC_CCM_CBCMR_GPU2D_AXI_CLK_SEL (1 << 0)
#endif
@@ -230,7 +237,6 @@ struct mxc_ccm_reg {
#define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7
#endif
#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
-#define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6)
#define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6
#endif
#define MXC_CCM_CSCMR1_PERCLK_PODF_MASK 0x3F
@@ -244,15 +250,12 @@ struct mxc_ccm_reg {
#define MXC_CCM_CSCMR2_ESAI_PRE_SEL_OFFSET 19
#define MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV (1 << 11)
#define MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV (1 << 10)
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6QP))
#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3 << 8)
#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 8
+#endif
#define MXC_CCM_CSCMR2_CAN_CLK_PODF_MASK (0x3F << 2)
#define MXC_CCM_CSCMR2_CAN_CLK_PODF_OFFSET 2
-#else
-#define MXC_CCM_CSCMR2_CAN_CLK_SEL_MASK (0x3F << 2)
-#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET 2
-#endif
/* Define the bits in register CSCDR1 */
#ifndef CONFIG_MX6SX
@@ -273,15 +276,7 @@ struct mxc_ccm_reg {
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
#endif
-#ifdef CONFIG_MX6SL
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F
-#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
-#else
#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F
-#ifdef CONFIG_MX6SX
-#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6)
-#endif
-#endif
#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
/* Define the bits in register CS1CDR */
@@ -316,10 +311,17 @@ struct mxc_ccm_reg {
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18)
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18
#define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v) (((v) & 0x7) <<
18)
+
+#ifdef CONFIG_MX6QP
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x7 << 15)
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 15
+#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x7) << 15)
+#else
#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16)
#define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16
#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16)
#endif
+#endif
#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12)
#define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12
#define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9)
@@ -384,6 +386,7 @@ struct mxc_ccm_reg {
/* Define the bits in register CSCDR2 */
#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19)
#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19
+
/* All IPU2_DI1 are LCDIF1 on MX6SX */
#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15)
#define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET 15
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 50370e1..b5de280 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -30,6 +30,9 @@
#define CONFIG_MP
#define CONFIG_MXC_GPT_HCLK
+#ifdef CONFIG_MX6QP
+#define CONFIG_MX6Q
+#endif
#define CONFIG_SYS_NO_FLASH
--
1.8.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
