This patch clears the errors found by running checkpatch.pl on file
drivers/spi/fsl_espi.c
Signed-off-by: Chakra Divi <cd...@openedev.com>
---
drivers/spi/fsl_espi.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
index 375dc07..9d9a6e0 100644
--- a/drivers/spi/fsl_espi.c
+++ b/drivers/spi/fsl_espi.c
@@ -92,11 +92,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus,
unsigned int cs,
pm = spibrg / (max_hz * 16 * 2);
if (pm > 16) {
pm = 16;
- debug("Requested speed is too low: %d Hz, %ld Hz "
- "is used.\n", max_hz, spibrg / (32 * 16));
+ debug("Requested speed is too low: %d Hz, %ld Hz
+ is used.\n", max_hz, spibrg / (32 * 16));
}
- } else
+ } else {
pm = spibrg / (max_hz * 2);
+ }
if (pm)
pm--;
fsl->pm = pm;
@@ -121,7 +122,7 @@ void spi_free_slave(struct spi_slave *slave)
void spi_init(void)
{
-
+ ; /* Do nothing */
}
int spi_claim_bus(struct spi_slave *slave)
@@ -177,7 +178,7 @@ int spi_claim_bus(struct spi_slave *slave)
void spi_release_bus(struct spi_slave *slave)
{
-
+ ; /* Do nothing */
}
static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout)
@@ -264,7 +265,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *data_out,
max_tran_len = fsl->max_transfer_length;
switch (flags) {
case SPI_XFER_BEGIN:
- cmd_len = fsl->cmd_len = data_len;
+ fsl->cmd_len = data_len;
+ cmd_len = fsl->cmd_len;
memcpy(cmd_buf, data_out, cmd_len);
return 0;
case 0:
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
