Hi Peter, On 8 July 2015 at 09:57, Peter Griffin <[email protected]> wrote: > This pmic is used on the 96boards consumer edition HiKey board. > > Signed-off-by: Peter Griffin <[email protected]> > --- > arch/arm/include/asm/arch-hi6220/hi6553.h | 75 > +++++++++++++++++++++++++++++++ > 1 file changed, 75 insertions(+) > create mode 100644 arch/arm/include/asm/arch-hi6220/hi6553.h
Should be in drivers/power/pmic I think. Also use struct for reg access. Should probably use the new PMIC uclass (we can convert it later if you don't have a device tree yet). > > diff --git a/arch/arm/include/asm/arch-hi6220/hi6553.h > b/arch/arm/include/asm/arch-hi6220/hi6553.h > new file mode 100644 > index 0000000..d0770e1 > --- /dev/null > +++ b/arch/arm/include/asm/arch-hi6220/hi6553.h > @@ -0,0 +1,75 @@ > +/* > + * (C) Copyright 2015 Linaro > + * Peter Griffin <[email protected]> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#ifndef __HI6553_PMIC_H__ > +#define __HI6553_PMIC_H__ > + > +#define HI6553_DISABLE6_XO_CLK 0x036 > + > +#define HI6553_DISABLE6_XO_CLK_BB (1 << 0) > +#define HI6553_DISABLE6_XO_CLK_CONN (1 << 1) > +#define HI6553_DISABLE6_XO_CLK_NFC (1 << 2) > +#define HI6553_DISABLE6_XO_CLK_RF1 (1 << 3) > +#define HI6553_DISABLE6_XO_CLK_RF2 (1 << 4) > + > +#define HI6553_VERSION_REG 0x000 > +#define HI6553_ENABLE2_LDO1_8 0x029 > +#define HI6553_DISABLE2_LDO1_8 0x02a > +#define HI6553_ONOFF_STATUS2_LDO1_8 0x02b > +#define HI6553_ENABLE3_LDO9_16 0x02c > +#define HI6553_DISABLE3_LDO9_16 0x02d > +#define HI6553_ONOFF_STATUS3_LDO9_16 0x02e > +#define HI6553_PERI_EN_MARK 0x040 > +#define HI6553_BUCK2_REG1 0x04a > +#define HI6553_BUCK2_REG5 0x04e > +#define HI6553_BUCK2_REG6 0x04f > +#define HI6553_BUCK3_REG3 0x054 > +#define HI6553_BUCK3_REG5 0x056 > +#define HI6553_BUCK3_REG6 0x057 > +#define HI6553_BUCK4_REG2 0x05b > +#define HI6553_BUCK4_REG5 0x05e > +#define HI6553_BUCK4_REG6 0x05f > +#define HI6553_CLK_TOP0 0x063 > +#define HI6553_CLK_TOP3 0x066 > +#define HI6553_CLK_TOP4 0x067 > +#define HI6553_VSET_BUCK2_ADJ 0x06d > +#define HI6553_VSET_BUCK3_ADJ 0x06e > +#define HI6553_LDO7_REG_ADJ 0x078 > +#define HI6553_LDO10_REG_ADJ 0x07b > +#define HI6553_LDO19_REG_ADJ 0x084 > +#define HI6553_LDO20_REG_ADJ 0x085 > +#define HI6553_DR_LED_CTRL 0x098 > +#define HI6553_DR_OUT_CTRL 0x099 > +#define HI6553_DR3_ISET 0x09a > +#define HI6553_DR3_START_DEL 0x09b > +#define HI6553_DR4_ISET 0x09c > +#define HI6553_DR4_START_DEL 0x09d > +#define HI6553_DR345_TIM_CONF0 0x0a0 > +#define HI6553_NP_REG_ADJ1 0x0be > +#define HI6553_NP_REG_CHG 0x0c0 > +#define HI6553_BUCK01_CTRL2 0x0d9 > +#define HI6553_BUCK0_CTRL1 0x0dd > +#define HI6553_BUCK0_CTRL5 0x0e1 > +#define HI6553_BUCK0_CTRL7 0x0e3 > +#define HI6553_BUCK1_CTRL1 0x0e8 > +#define HI6553_BUCK1_CTRL5 0x0ec > +#define HI6553_BUCK1_CTRL7 0x0ef > +#define HI6553_CLK19M2_600_586_EN 0x0fe > + > +#define HI6553_LED_START_DELAY_TIME 0x00 > +#define HI6553_LED_ELEC_VALUE 0x07 > +#define HI6553_LED_LIGHT_TIME 0xf0 > +#define HI6553_LED_GREEN_ENABLE (1 << 1) > +#define HI6553_LED_OUT_CTRL 0x00 > + > +#define HI6553_PMU_V300 0x30 > +#define HI6553_PMU_V310 0x31 > + > +unsigned char hi6553_read_8(unsigned int offset); > +void hi6553_write_8(unsigned int offset, unsigned char value); > + > +#endif /* __HI6553_PMIC_H__ */ > -- > 1.9.1 > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
