> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Vladimir > Zapolskiy > Sent: 6-Jul-15 12:22 AM > > LPC32xx MAC and clock control configuration requires some minor quirks > to deal with a phy connected by RMII. > > It's worth to mention that the kernel and legacy BSP from NXP sets > SUPP_RESET_RMII == (1 << 11) bit, however the description of this bit is > missing in shared LPC32x0 User Manual UM10326 Rev. 3, July 22, 2011 > and in LPC32x0 Draft User Mannual Rev. 00.27, November 20, 2008, also > in my tests an SMSC LAN8700 phy device connected over RMII seems to > work correctly without touching this bit. > > Add support of RMII, if CONFIG_RMII is defined, this option is aligned > with a number of boards, which already define the same config value. > > Signed-off-by: Vladimir Zapolskiy <v...@mleia.com> > --- > arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 7 ++++++- > drivers/net/lpc32xx_eth.c | 20 +++++++++++++++++--- > 2 files changed, 23 insertions(+), 4 deletions(-) >
Resent as the original tested by e-mail did not record on patchwork; I tested this patch and the 3 patches listed below using a Micrel KSZ8031RNL phy connected over RMII. Everything is working properly. - http://patchwork.ozlabs.org/patch/489100/ - http://patchwork.ozlabs.org/patch/489190/ - http://patchwork.ozlabs.org/patch/491419/ Tested-by: Sylvain Lemieux <slemi...@tycoint.com> ________________________________ This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot