On Monday, August 03, 2015 at 05:45:34 PM, Marcel Ziswiler wrote: > Hi there > > Trying to update one of my patch sets of late made me notice that the > ASIX USB to Ethernet stuff if CONFIG_DM_ETH is enabled seems to be > rather broken. I already sent two patches to even get that far but even > with that reception still does not seem to work (see below). I tested > by enabling CONFIG_DM_ETH on Colibri T20/T30 as well as Apalis T30 with > CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX enabled and a LevelOne > USB-0301 ASIX AX88772 dongle. Has anybody actually tried that lately? > > Colibri T20 # usb start > starting USB... > USB0: USB EHCI 1.00 > USB1: USB EHCI 1.00 > USB2: USB EHCI 1.00 > scanning bus 1 for devices... 1 USB Device(s) found > scanning bus 2 for devices... > Warning: asix_eth using MAC address from ROM > 2 USB Device(s) found > scanning bus 0 for devices... 1 USB Device(s) found > Colibri T20 # tftpboot $loadaddr uImage-colibri_t20 > Using asix_eth device > TFTP from server 192.168.10.1; our IP address is 192.168.10.4 > Filename 'uImage-colibri_t20'. > Load address: 0x1000000 > Loading: EHCI timed out on TD - token=0x8008d80
This stuff looks more like a breakage in the EHCI controller, no ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
